Start takes too long to engage, at least 2-3 secs..

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
Two-Forty
Posts: 396
Joined: Fri Nov 01, 2002 2:52 pm
Contact:

Post

is this normal for a s13? and when it initial start up the car shakes a lil bit, any input is appreciated.


Silvia007
Posts: 1587
Joined: Thu Jul 25, 2002 6:04 am
Car: 93 Nissan 240SX SE Fastback

Post

Mine does, takes approx. 2 seconds for the car to catch, not only that, if the car is warm, say when I run to work, and shut it off then start it directly back up, it would start then stall. If I start it up a second time, it works fine.

R240NA
Posts: 462
Joined: Sun Sep 15, 2002 7:43 am

Post

Could be the severe lack of oil you have in your motor.

Daunttless
Posts: 3890
Joined: Sun May 12, 2002 7:20 am

Post

Its regular for a car to take a few seconds to start. : ) Thats normal, also the vibration is the torque of the motor and additionally the KA is a very vibration motor both because of its crankshaft balance and the way the motor is mounted.


Return to “240SX Technical Forum”