Start Problem

[dima]

Hi all.This morning I was about to go out and when i start my 95 240sx se KA24DE it started fine, but after about 2 seconds it stoped. When I tried to start it again, motor spined like crazy, but non of the cylenders catch up. I tried to start it about 10 times same story. Just before i was ready to call it quit it starts but sound like it miss one cylender. After pumping gas pedal for few times it start working fine. I took it for a spin (100 miles) motor sound good axept one time it sckiped one cylender for a moment. After getting home I took distrebuter off and cleaned all connectors, (file them off with fine sand paper) poot all together start car no problem.What do you think it could be? DON'T WANT TO STUCK SOMEWHER WITH DEAD CAR.Thanks

[NISTECH]

next time it happens,if it does, try holding the pedal to the floor and crank it awhile see if it starts. if so its just flooding out. could be a base idle out of adjustment, carbon build up around throttle plate or in air valve, coolant temp sensor connector corroded or sensor out of spec.

[dima]

Thanks