standalone/piggyback question

[pdvorak]

i'm upgrading my injectors and maf, and i want to know if i have to upgrade my ecu. or which standalone/piggyback system is good.

[rb240det]

Get it chip tuned.

[pdvorak]

it's a rb25det. can you chip the ecu?

[Kansei240sx]

not at the moment, there is a daughter board system being developed by a company called Nistune. As far as upgrading ECU's or engine managament for injectors, im kind of in a bind as far as that, im probably going to get the Nistune ECU once its done.

[Tripz]

Sorry but it's going to be slightly off topic, I was installing my PFC today and was going the the learning process of letting it idle for 30 mins, 10mins demister, aircon, etc. and after that I took it for a spin. It was bogging really bad and hunting during idle. So I've went to setting's and airflow, it was set at a different setting, so I've changed it to R33 Normal and idle smoothed out. So I'm going to install again tomorrow and my question is should I set it at the superintake setting (since my isn't completely stock)?

Mods:

S1 rb25detFMICApexi AVCRstock turbostock injectorsintake (cone type)boost set at 12 psiam-performance turbo elbow/downpipe (3 inch thoughout with apexi n1 exhaust)

[the_momo]

piggyback ftw! i hate having to use my own legs.

i hear the pfc is good for the rb25.