Sr20det won't start

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
emo
Posts: 61
Joined: Mon Nov 05, 2007 4:05 pm
Car: s14b & gs300
Contact:

Post

ok me and my buddies pulled a all nighter to finish my sr20det swap. when i went to go turn the car on it would give the ignition sound like it would want to start but just cranks im not sure whats the problem but i think it would have to do with the ignitor plugs (being 2 plugs in the car) not being plugged in. i dont know exactly where they go so we didnt plug them in but a little guidence would help thanks


Emperor_Tha
Posts: 834
Joined: Wed Nov 22, 2006 12:56 pm

Post

Check to see if u have spark and fuel first. Then we can go from there.

User avatar
17wantinga240
Posts: 226
Joined: Wed Oct 18, 2006 7:13 pm
Car: 91 240sx 1986 toyoa cressida

Post

are you sure your timing is set correct?ground wires?

emo
Posts: 61
Joined: Mon Nov 05, 2007 4:05 pm
Car: s14b & gs300
Contact:

Post

how do i check if it sparks? the fuel is there i put 93 octane in and i can hear the welbro fuel pump turn on with the key. and no hasn't been timed =[ nor have i done anything with the crank angle sensor what are the proper setting for them?

duffman1278
Posts: 6816
Joined: Sun Apr 01, 2007 3:09 pm
Car: 89 240sx Hatch, the wildcats!

Post

Sounds like a timing issue. Go read up on how to set the timing, theres PLENTY of links online that will show you exactly how to do it. And read up on nico. And definitely check for spark


Return to “SR20DET Forum (rear-drive)”