Sr20DET Stalls at Idle!!

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
JDM_RPS13.5_SR20DET
Posts: 46
Joined: Mon Mar 17, 2008 1:47 pm
Car: 1991 Nissan 180sx

Post

hey so i havent heard anything about this and dont know whats the problem. basically my car was running about a week ago but the oil pan was leaking bad so i finally just got a new oil pan in today and put that on. but over the last week i have removed my ac and done a couple other things. anyways i go to start my car and it starts up fine then when it idles down it stalls. i checked the ground and everything to see if the injectors stopped. ground seems fine. when i rev the engine the engine runs fine, so the maf must be fine and so is the fuels system. as soo nas it goes to idle down it stalls. Any Help Anyone Thanks!


User avatar
JDM_RPS13.5_SR20DET
Posts: 46
Joined: Mon Mar 17, 2008 1:47 pm
Car: 1991 Nissan 180sx

Post

so i have been trying to check out my ecu to see if any fault codes are flashing but i dont know how to get it to do start flashing any faults...Please help

User avatar
JDM_RPS13.5_SR20DET
Posts: 46
Joined: Mon Mar 17, 2008 1:47 pm
Car: 1991 Nissan 180sx

Post

alright this is getting rediculous... so i check the fault codes on my ecu and this is the fault i get55 - Other Malfunction. CONSULT Terminal Required

the only one that is open ended??


User avatar
JDM_RPS13.5_SR20DET
Posts: 46
Joined: Mon Mar 17, 2008 1:47 pm
Car: 1991 Nissan 180sx

Post

im gunna check for vacuum leaks tomorrow!


Return to “240SX Technical Forum”