sr20det stalling problem

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
raptor727
Posts: 61
Joined: Tue Dec 11, 2007 12:35 pm

Post

so i swapped my valve cover today and now i am having a stalling issue when coming to a stop. didnt do it before i swapped them. the reason i swapped them is because i had one powder coated. could a clogged or bad pcv valve cause this? or any other ideas? all vacuum lines are attached. at idle revs fine and idles fine. when driving fine when you first start driving but after a minute or 2 when coming to a stop it stalls. revs drop really fast it seems.


raptor727
Posts: 61
Joined: Tue Dec 11, 2007 12:35 pm

Post

cleaned maf and still the same doesnt want to idle when i come to stop. idles fine at start up only starts acting up after a minute or two of driving. any suggestions?


Return to “SR20DET Forum (rear-drive)”