SR20DET S14 lower wiring harness help

[balmjohn]

So as some of you may know I'm swapping an S14 SR20DET blacktop into my 95 S14. Swap is going well minus the lower SR wiring harness, that does not match up to the fuse box. I've read that you can just use the KA lower wiring harness and everything is plug and play into the SR. I've also read about splicing the KA harness to fit the SR. Unfortunately most of the things I've read about this subject are for S13s. Any help would be great.

[nzt1313]

Use your KA harness. Should work fine.

[balmjohn]

thanks man, I emailed phase2 and they told me the same thing

[grndrifter]

I just did the same swap and used my ka harness and everything worked fine. good luck with your swap

[nitescream]

so basically your saying that i dont need to send the car out to get it wired!!?? cause i have a 95 240sx, and it should be plug and play

[vocationalzero]

so basically your saying that i dont need to send the car out to get it wired!!?? cause i have a 95 240sx, and it should be plug and play

for the lower (transmission part) of the harness, it's plug and play. but the main engine harness has to be modified. although it's not hard...

[bubzb20z]

What if the chassis was an automatic?

Is where were at with the swap in my car at the moment.

Kouki sr20det swap into early 95 auto

[1deadwhite240]

hi am doing the same swap as balmjohn and am lost on what wires on main harness to rework please bail me out so i can chnge my screen name Thanks.