SR20DET Redtop Heater Hoses issue

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
kitkat224
Posts: 20
Joined: Thu Mar 13, 2008 3:21 pm
Car: 1996 Nissan Pathfinder SE (Sold), 1992 Nissan 240sx Convertible LE (Sold), 2004 Nissan 350z

Post

i bought the 3 hoses the L, U, and S. to attach to the s13 heater core

has anyone done this? anyone have a picture of what it suppose to look like?

U hose on left S hose on rightU Hose on the left L hose on the right ( skinnier => ?why? )i assume the S is the bottom one how do i make the other 2 work?



User avatar
Steady_One_S13
Posts: 2168
Joined: Tue Sep 16, 2008 9:42 am
Car: 1991 SR'd 240sx S13, 1993 Toyota SW21 Mr2...
Location: 915
Contact:

Post

You have everything but the heater hose connector. It bridges the U-shapeand L-shape hoses. I believe Auto Zone or NAPA has it. One end is 5/8 and the other end is 3/4 (Dorman: Part# 47080). It's a hard plastic connector, sort of like a coupler w/ two different end sizes.

The U-shape hose connects to the SR pipe that curves left. Bridge it with the L-shape hose and connect it to the top heater core port on the fire wall.

You can figure out the S-shape one. Easy shiz. Just measure and trim thehoses to the right length. I wish I had pics, but I don't. Sorry.Hope that helps.G/L


User avatar
positron1
Posts: 3609
Joined: Mon Mar 21, 2005 12:29 am
Car: Project: 1993 Nissan 240SX Coupe SR
Daily: 2010 Honda Civic Coupe
Location: Starkville, MS.

Post

zer...age=2scroll halfway down the page.


Return to “SR20DET Forum (rear-drive)”