sr20det redtop harness question.

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
chitown240SX
Posts: 71
Joined: Tue Oct 31, 2006 5:23 pm
Car: 1997 NISSAN 240SX

Post

OK so im going to buy a redtop sr engine and transmission W/harness, mounts and Ecu etc. from a buddy that had it on his 1991 S13. Im going to swap it in my 1997 S14 do I need to rewire the harness or should it be a complete drop in?



User avatar
Hijacker
Posts: 14373
Joined: Wed Aug 13, 2003 4:57 am
Car: '92 240sx Convertible
'94 F-150
Location: Fredericksburg, VA

Post

97s are more complex to wire than 91s. I suggest doing some research so you understand what you're getting into

chitown240SX
Posts: 71
Joined: Tue Oct 31, 2006 5:23 pm
Car: 1997 NISSAN 240SX

Post

bump..

duffman1278
Posts: 6816
Joined: Sun Apr 01, 2007 3:09 pm
Car: 89 240sx Hatch, the wildcats!

Post

After research you'll probably realize you're better off sending it to a shop that does the wiring conversion for you. Unless you're good with wires and find the guides which are all over the forums and net.


Return to “SR20DET Forum (rear-drive)”