SR20DET pickup

[tubakins]

Has any one herd of sum 1 putting a SR in a Nissan pickup?

[lee_harvey]

no, but i have seen a 240 converted to a truck.

[240SXer]

SR20DETs have been put into trucks a bunch of times....

The dude used to be on here SR20DETruck

[need2drift]

yea I have seen them a few times

[Henry G]

It's been done ALOT of times.

[creophus]

Yep, I've seen one or two. Seems pointless to me.

[kane2g]

Has any one herd of sum 1 putting a SR in a Nissan pickup?

CheezHead!!! HEHEActually I have been considering getting a cheap Pickup and putting a SR in it, but I decided to get my S14 instead.I do beleive that there was something about banging on the firewall for the SR to go in. Hell I know it that my S13 has almost no space between the back of the motor and firewall.

[op.tic]

i remember reading about one

a 2wd hardbody is pretty much layed out the same as a early 240sx, and there are probably issues with the firewall, hardbodies have a really small engine bay

i would rather turbo my 94 vg30e hardbody, think about it.. its the same motor that was used in 300zx's, except i doubt there is any room on the driver side bay to bolt up the manifold and turbo, i would rather do it on the passenger side bay, there is alot of room to mount it, except you would have to rerout the exhuast crossover.. but i assume you could just not crossover the exhuast and just use three cylinders to spool the turbo

but all id do is put a really really small turbo on it, run quite low boost, these single cam vg's dont have a whole lot of power

[DawgMode]

anyone got pics or a link???

[nv240fastback]

theres a dude in vegas with a sr powered hard body.

[bustiegtr]

I have done it to a 91 hardbody with the redtop and its not difficult and (firewall) clearance is not really an issue

[RPS13 Rocket]

heres a pic

[RPS13 Rocket]

nother