SR20DET Parts Guide

Post by **grosspolluter** » Tue Dec 20, 2005 5:11 pm

Nice post.....I bet that took alot of work to put together.

Post by **nismonate** » Fri Jan 13, 2006 12:23 pm

i need a powersteering line for the driver's side. anyone have the part # for that at autozone?

Post by **jmancuso** » Sat Feb 11, 2006 6:25 am

Hey all these part#'s are great........just one question are they American numbers or Japanese? I called the local Nissan dealer looking for a water pump and gave them this number (Water pump Jan 1991 - Dec 1998 21010-52F01) and they say it is a invalid number. Can you give any guidance on locating a water pump?

Post by **nothingFancy** » Thu Mar 02, 2006 4:31 pm

bump for the SR alternators.

my sr alternator took a **** , it was a 80 amp alt. to replace your altanators you buy a ka24de 80 amp alternator and with no modifications it bolts right in, for the pully part you need to put a 1\4" thick washer then put the pulley on then the nut to use the 5 rib pulley

Post by **wildacexxx** » Thu Mar 23, 2006 6:26 pm

anybody know the part number for the 2 prong coolant temp sensor (the one that sends to ecu not the gauge)?

Post by **wildacexxx** » Thu Mar 23, 2006 9:50 pm

ok thanx. i bought the one thats listed on the first page but its the one that sends to gauge and i need the one that sends to ecu. thanx again.

Post by **elvis240sx** » Tue Mar 28, 2006 2:15 pm

What about a part # for the crank angle sensor gasket? i know its just an o-ring but it would be nice to have the proper one. thanks!

Post by **elvis240sx** » Tue Apr 04, 2006 10:14 am

is that a japanese part number? i cant seem to get it to work

Website · Post by **gtune4** » Wed Apr 12, 2006 2:53 am

so there is no other option for a starter than to get an s-13,14,15 motor from somewhere?

what about what the guy said about switching the internals from the ka sohc into the bracket of the sr starter?

Post by **tiger** » Fri May 19, 2006 7:10 am

If this hasn't already been said.....

91-99 (FWD) Rod Bearings, Main bearings and Piston rings from the SR20DE do cross over and you can use them in the SR20DET.

Post by **180fan** » Mon May 22, 2006 11:29 am

efrain240sx wrote:can you gust plug it in into the stock harness

Yes the suzuki sidekick's ignitor chip will plug right into the sr harness.

Post by **tonis56** » Wed May 31, 2006 8:49 am

SpeedRacer1 wrote:Piston oil jet assembly:Redtop - 11560-79E00Blacktop/late redtop - 11560-1E000

I checked courtesy nissan for this number and nothing came up. However when I type in "oil jet" the part number 11047-W0500 and 11047-21000 came up.

Post by **UltraRed2$0sx** » Wed May 31, 2006 2:14 pm

Whats up guys....I was wonderiggn if anyone can help me find out teh part number for:

Manual transmission Bellhousing BOLTS.. Preety much tranny bolts. I have heard that the Sentra SE-R work but i rather be sure before i order them.

Also....These parts:

Upper waterneck Jan 1991 - Aug 1996 11060-52F00, 11060-52F01Upper waterneck Aug 1996 - Dec 1998 11060-65F00, 11060-65F01

which one is the part number for the cooling passage in the exhaust side...The one that goes underneath the Distributor/CAS.

Im working with an NA RWD SR20 if tha makes a diff.thanx

Paul

Post by **tonis56** » Thu Jun 01, 2006 4:37 am

SpeedRacer1 wrote:The part numbers that I listed were JDM only numbers, there is NO US crossover for that particular part. The part numbers I listed were for the oil jet that sprays the underside of the piston. The numbers you just listed are just the little metal tubes that go between the block and the head to traffic oil.

Is there a place that might sell the JDM ones?

Post by **myees13** » Tue Jun 06, 2006 10:42 am

gtune4 wrote:so there is no other option for a starter than to get an s-13,14,15 motor from somewhere?

what about what the guy said about switching the internals from the ka sohc into the bracket of the sr starter?

I just did this yesterday.

Donor starter from S13 KA24DE

-Remove SR starter-Take them both apart (2 long bolts on motor/2 short bolts on soleniod)-Re-use SR bottom part/bracket-Install the KA starter motor and soleniod onto SR bracket-Re-install hybrid starter

I had to get creative with the small clip that goes to the soleniod. It works great!

Email me if you have any questions about it.MyeeS13 @ hotmail. com
Modified by myees13 at 9:22 AM 6/15/2007

Post by **180fan** » Sun Jun 18, 2006 12:13 am

For those of us in need:

Nismo exhaust hangers: 20651-RS230

Post by **tiger** » Sun Jun 18, 2006 5:14 am

Hey, the japanese part numbers for the exhaust valve seals cross over to the VG30 and the intake valve seals cross over to the SR20 DE.... i'm about to rebuild my SR20DET head and I need to know if I need to get intake seals from the sr20de and exhaust seals from the VG... is this right, or should I get all seals from the SR20DE ????

AND...

that baffle plate... does anyone know the PN? Is it called "upper baffle plate"or Crankcase baffle plate??? help. thank you

Post by **180fan** » Sun Jun 18, 2006 8:01 am

I left the US part numbers on the first page for the valve stem seals and the engines they come from

Post by **tiger** » Sun Jun 18, 2006 11:13 am

Sorry 180 fan, I guess I didn't see it. Thank you speed racer for the PN. I misplaced that baffle plate and I just couldn't be ghetto and rebuild it without it, It's there for a reason! Gracias!

Post by **s14brent** » Sun Jul 09, 2006 3:52 am

sorry but iirc the sr20det uses Z32 tt rear main seal. part # ends in AD205. this is for the first post that says 93 KA one fits.

Post by **streetspirit7** » Sun Jul 09, 2006 5:20 am

I didnt' see it anywhere in this fourm, but I'm looking for a crossover part for the O2 housing gasket (between the turbo and O2 housing) for an s14 sr. Anyone one know if there is one?

Post by **analogassassins** » Fri Jul 14, 2006 7:55 am

can anyone here please let me know if the 300zx TT fuel injectors will fit into my blacktop sr20det? got a problem with mine, stuck or something. need quick easy fix and dont want to spend $300 on 550cc upgrades just yet, unless someone knows where i can get a cheap upgrade for the 370cc injectors in my SR. please help. thanks.

sincerely

billy banalog presidentmyspace drift team

Post by **S13FASTBACKSR** » Thu Aug 10, 2006 7:30 am

been almost a month since you asked this question analogassassins but yes you can use a '95 300zx TT fuel injector..of course look the picture of it up on advance auto parts website or autozones website and make sure it looks the same.

Post by **Drake** » Wed Aug 16, 2006 6:09 am

SpeedRacer1 wrote:The part numbers that I listed were JDM only numbers, there is NO US crossover for that particular part. The part numbers I listed were for the oil jet that sprays the underside of the piston. The numbers you just listed are just the little metal tubes that go between the block and the head to traffic oil.

I was curious about that too, i've looked at courtesy and even tried googling the part number for those jet's. Does any one have any idea where I can get my hands on them(oil jets)?

Post by **corey240** » Sun Sep 10, 2006 10:31 am

just to clear any questions up the sr20de crankshaft is interchangable with the det and so are the bearings, would the crank pulley work too?

Post by **wei240** » Mon Sep 11, 2006 10:29 am

what about head studs - oem part number(s), i know the arp parts are listed, but what about oem ones?

thanks

Post by **tiger** » Wed Sep 13, 2006 4:21 am

there are no such thing as oem sr20det "studs" ... there are head bolts. I would think they would be the same as the Sr20de's... call up nissan and find the pn and hopefully that dealer will have a jap parts catalog and they can cross reference the pn's...if they are the same then you have a match

Post by **wei240** » Fri Sep 29, 2006 6:23 am

Anyone know the part numbers to:

http://phase2motorsports.store....html

I'm inquiring about s15 T28, but in order to have it fit in the s13 easier, there are a couple things that'll make life easier, according to phase 2:

- S14/S15 Turbo Oil Return Hose- S14/S15 SR20 Turbo Oil Return Tube- S14/S15 Turbo Outlet Pipepad- S14/S15 Turbo Inlet Pipe

They all look to be factory OEM parts...

Thanks

Post by **rob-s** » Thu Oct 12, 2006 8:02 pm

Ok, heres the questions. Ive been looking for info on getting a TPS. and cant seem to find a definate answer.

What year make and model options would have a tps for a sr20det redtopPlug and Play would be best but if some wiring is needed please specify what color goes where

My goal is to save a few bucks by just buying it from the parts store.Thanks in advance.

-RobIndependent AmsOil Dealerhttp://www.robsoil.com

Post by **koukicody** » Sat Oct 28, 2006 1:14 pm

any US crossover for the radiator itself, or any other nissan radiators that are the same?

SR20DET Parts Guide

Re: SR20DET parts guide (Movingviolation240)

Re: (SpeedRacer1)

Re: (SpeedRacer1)

cas gasket

Re: cas gasket (SpeedRacer1)

Re: (SpeedRacer1)

Re: (gtune4)

Re: (efrain240sx)

Re: (SpeedRacer1)

Re: (SpeedRacer1)

Re: (gtune4)

Re: (180fan)

Re: (SpeedRacer1)

Re: (tiger)

Re: (SpeedRacer1)

Re: (analogassassins)

Re: (SpeedRacer1)

Re: (SpeedRacer1)

Re: (corey240)

Re: (wei240)

TPS

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums