sr20det no spark what so ever!

[jimbean5006]

i have a new chipped ecu, harness done by wiring specialties, new spark plugs, new CAS sensor. new walbro 255 pump, full 3in exhaust. i have replaced so many things im out of ideas, its in TDC put the cas in time.

does anyone have a clue, also its throwing code 55, so no help there.i am about to try the calumsult or data scan to get some readings. i have had this swap in for months i need help in a seriously bad way

thanks

[duffman1278]

Have you checked your ignitor? Also, check the ground in the back of the engine for the coilpacks. It should be grounded to the back of the head.

[jimbean5006]

yes i even grounded the coil packs with an extra ground. and tried ignitor already, unless the cas and ignitor was bad, does anyone know how i can test the ignitor with a multimeter?and what a functioning one should read?

[duffman1278]

The FSM tells you how to test it, but I'd try another ignitor.

[jimbean5006]

heres the deal i replaced it, didnt work, took it back and put the old one in it, got a cas a new one and put it in, left it in cause its new. could the ignitor been bad as well? i woul;d rather know how to test it, and the fsm i have doesnt have that part in it, i downloaded it and those pages were missing. anyone know how i can test it before i buy another?\

[IDriveFords]

try borrowing a friends ecu thats what my problem was

[Hijacker]

Who tuned the ECU? and is it tuned for a stock fuel management system? Or did you have it chipped for a set of bigger injectors? Personally, I would try taking it back to a stock setup just to get the car running.

[jimbean5006]

it didnt work on stock settings either the chip came with the engine swap, i found it in the old ecu, and i have a new ecu. it was tuned on stock engine.