Sr20det into auto S13 (searched)

[tuxedo_guy]

I searched the topic and couldn't find anything. Whats all needed to mount an SR to an automatic transmission in an 90 s13. Don't ask why

[notslow]

SR Forum dood

PS. search more!

PPS. why? (only cause you said don't ask)

[Logan76]

you would need a bellhousing adapater to use the auto trans out of a KA onto your SR.

[tuxedo_guy]

Thanks logan, what type of bell housing adapter? Sorry for askin, not sure what your talkin about

PS. Done that

PPS. Your an ***

[silverarrow27]

Easiest way is to locate an auto sr to begin with. No fabrication needed.

[Logan76]

A bellhousing adapater would allow the bellhousing of the Auto KA transmission to bolt up to your SR motor, they are similar internally, the SR auto and the KA auto, but the bellhousing wont bolt up to your SR motor without some form of adapter.

[180sxmonster]

why would you go with auto even if your car is originally auto? i went with s14 sr 5spd into s13 auto.... its worth the changeover and youll learn a lot of stuff along the way....

[tuxedo_guy]

Yeah that would be a good experience, but more money ya know. Plus not too many people have auto

[Logan76]

I would try to find an Auto SR motorset, if I were you.

[180sxmonster]

it so easy if you are mechanically inclined.... there is a cutout for the clutch pedal and you can always get the pedal from a junk near you.... the clutch master cylinder back plate is traced out already and you can get the clutch line from nissan for i think $15... although i would wonder how an auto sr auto would feel pretty nice too....

also if you are doing auto, you need the ecu and i think an auto harness so i do think if you are going that route, you should get an auto motorset.....

[tuxedo_guy]

Yeah I've searched a lil bit and couldn't find anything. Any links?