SR20DET Conversion

[speedofsound2417]

ok I am wrapping up the last of the parts I am going to need for this swap and was looking for input as to what else I might want to replace or NEED

I am putting a SR20DET red top in my 89 240sx and

I have...

Engine & TrannyIgnitorECU & wiring

I am pretty sure I am gonna need:

FMIC & plumbingSR20 Gauge ClusterDOHC Power Steering Lines & Resevoir

Now I am wondering what else I need and should replace, I was thinking motor mounts, and water pump possibly..

I have searched around but found no one post that listed all the parts so I am trying to get a complete list if possible...

Thank You

[bone_stock_240]

Put in a new clutch, and change your throwout bearing and pilot bushing while you have it out. Also, may as well change all the gaskets while they are easy to get to.

[180fan]

dohc ps lines and reservoirmafs from your sohcmake sure you've got all the harnesses (upper, lower, and the subsection that runs to the coilpacks)that you've got 4 coil packsintercooler pipingrubber hose for the mafs to the t25ecusmic at the very leastthe motor and transmission mounts - yours is probably trashed already and possibly the nuts that hold the motor mounts to the crossmembersome pb blaster