Sr20det build

[Nicen96]

I am about to start building my 98 sr20det black top and i wanna know what mafs and injectors i should go with for the 500hp range also about building the bottom and top end to anyinput will be great i have about 8000 dollars to spend o yea the year of the car is 96 240sx se.

Thanx to anyone that helps Jake

[supreamS14]

z32 maf for up to 550whp

[S14toRPS13]

740cc injectors

What size turbo are you going with and what are you building the car for?
Modified by S14toRPS13 at 8:15 PM 3/28/2008

[Nicen96]

well it will mostly be used to drag but maybe for autocross so but the main thing will be drag. also what is the next best mafs sensor that can make more power than the z32. more than likely i will going with a gt35r or the gt3076r and this will be a top mount setup. but as of right now i will be running the stock t28 and the bottom end will be built. thanx alot jake.

[xsublimefrekx]

i should be making about this power with my gt35r on a fully built sr this summer when i get retuned. I am running 850cc injectors and i converted over to map sensor. I think you also need to think about engine management. A AFC will work like garbage with any injector over 600cc. If you go with a standalone i would recommend going map sensor.

[Nicen96]

i plan on going with the greddy ultimate what map sensor should i go with to get to the 500hp range. thanks alot man

[xsublimefrekx]

im not sure if greddy sells a map sensor kit with their kit. I have seen people do it. I would just run like a gm 3.5 map sensor. I am running the aem sensor because i am running the aem ems.