SR20DET - BOV Location and Pipes conection Doubt...

[iLL_Nino]

Hi there, I have some doubts about the SR20DET

What is the best position for de BOV ? Next of the turbo and Before de FMIC ou next to the FMIC and before the Intake ?? And why ?

In the next picture I have another doubt...the two pipes are from this Can to the Engine (Yellow Spots), but some people have said that it should go to the intake (Red Spots), whats better ? and what is the can ?

[fregisr]

the can is just for emmision control

[200sx-S14]

Up!!!

[Luke]

The can definitely connects to the engine, below the throttle body.

[bluesguy321]

I dont know if you can see it in the pictures but the guys at XAT racing in tampa put it in this location

[bluesguy321]

sorry bout the pic....

but the bov is in the front bottom left of the ic piping, which is out of the way of everything

[iLL_Nino]

Hummm

The can should be connected to the Throttle Body (red Spots)

And the BOV should be between the IC and the Throttle body ??

PS: Sorry for my english

[s13_drftone]

for better response you must located on cold side of the intercooler which is next to the throttle body