Sr20 not starting -> Has run just a few days ago

[Artigo]

Ok so I have a s13 Sr20 in my 240sx. The car was running ok with the motor a few days ago, however it was having trouble over 3k rpms running lean so clearly it was the pump. So I rewired the pump with better connectors and did a much better job on the pump this time, I'm sure of that (It is a walbro 255). However, the car won't start now. It cranks, but won't start.

Possible choke in the fuel line? Or something else?

Thanks

[Justin35ll]

Need more info, we don't have the car. It could be anything. pull the fuel rail out and crank it over see if you're getting fuel

do you hear the pump prime when u turn the key on?

[Artigo]

I had been messing with the pump prior to today trying to get it to pump correctly and would hear the pump when it got power.. not hearing it anymore though.

[Fuel4Blood]

Check and make sure your getting power to the pump

[Artigo]

Thanks for the help guys, I feel like an idiot. Fuse was blow to the pump *facepalm.

[EnjoiNismo]

Haha lucky it wasn't nothing big. Don't feel bad, my headlight when out and i bought new bulbs, swapped out lights, tracking wires, and it turned out to be the fuse -_-