SR20 Lower Harness

[hks240sr20]

Hey, I've got a S13 SR Redtop that i'm getting ready to complete my swap on, and the bastards that sold me the engine cut the plugs off the lower harness that would plug into the vehicle. So basically I have the Wires coming out of the Starter and alternator, but no plugs on the end. Anybody have any idea what wires those need to goto, and if it's alright if i just hard wire them? Thanks for any help u guys can give me.

[vocationalzero]

*edit*i am pretty much positive YES on the starter and pretty sure on the alternator.

[Hijacker]

Use the lower harness from a KA and you'll be gravy. You will need to alter one of the connectors for the starter to make it work.

[hks240sr20]

Hey, thanks for the quick reply, I appreciate it. I don't seem to have my KA Harness so I think I'm just going to try and match the colors up of the wires I currently have to the 240 Harness by the fuse box and hard wire it in.

[duffman1278]

Its real easy, this happened to me too, the wires were cut, it was lame. I just spliced the connectors form the SR onto my KA harness.