sr wont start

[dj_lennon_franz]

had to swap my sr to a new chassis...we used the wiring harness and everything...the harness is plugged in and everything gets power...the starter clicks when it trys to turn on...NOTHING...its not the battery...one strange thing i did notice though is that the tach needle sometimes flicks all over the place...not sure what that is...we never disconnected the harness from the motor....just from the ECU, fusebox, and small appropriate places...not one plug was touched on the motor itself...im dyin here guys....not a noob at this...but im really stuck

i checked the fuses, grounds, harness plugs, and pretty much ne thing i could think of....everything seems to be hunkey dori in the engine bay

[180fan]

I've got my bets on a ground. Possibly one got loose at the intake manifold? You know, those two at the back.

[ETTInnov04]

We just had a week long discussion on something similar to this:http://www.nicoclub.com/zerothread?id=101949

I'm in the dark about your tach though.

[NisanS13turbo]

We just had a week long discussion on something similar to this:http://www.nicoclub.com/zerothread?id=101949

I'm in the dark about your tach though.

Yea, me to. Probably needs a replacement....i dont know ^^ good luck