sr wont crank

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
luis741953
Posts: 111
Joined: Tue Oct 10, 2006 10:16 am
Car: 1995 nissan 240sx se

Post

i finished installing everything on my swap, i have two wires hanging by my ignitor, and i cant figure out where they connect to, the car wont even crank, i had my wiring done by wiring specialist, the connector has a orange wire and brown one , pink purple and a blue with yellow stripe wire, i think one of the connectors goes to my speed sensor, but if you can guide in the right direction please dothanks


silverarrow27
Posts: 460
Joined: Thu Sep 16, 2004 7:25 am

Post

Dead battery?

User avatar
sicairos_2007
Posts: 119
Joined: Sun Mar 18, 2007 6:27 am
Car: 3 Nissan 240 Sx

Post

when i installed my sr engine by my ignitor i have 2 extra plugs too one is for the washer fluid motor and the other is like a stock boost controler thats what they have told me and you dont need then to get the car running they are not needed at all, and your cranking problem you dont have an alarm system by any chance check a dead battery i know it sounds stupid,..... but u never know or check your lower harness... when you crank do you get any noises...


Return to “SR20DET Forum (rear-drive)”