SR Redtop --> S14 Wiring, Please HELP!!!

[AznRide]

I thought it would be a piece of cake, but after pulling out the SR harness today, I got a little bit scared. The KA and the SR are 2 different harnesses, but the KA I won't be using except for the 4 plugs (Wiper motor, Wiper Amplifier, ECCS, and ECU Relay - F7, F9, F3, and F2). I have include the 2 pictures of the KA harness and SR harness. I can Identify the KA Harness because I have the plugs' names from Alldata. So...

1. Where can I find the F2, F3, F7, and F9 in the SR harness so I can swap in the KA ones?

2. From http://sr20.hybrids.jp/install....html - It said I need F8 from S13 which is the power plug. It explained that this wire is from my instrument cluster. Why would I need this?

3. SR Instrument cluster - I think this plug is right next to the ECU plug which connects to the harness of my s13 clip harness. I will have to cut this off and mate the KA (F3) one in right? But here is what I have noticed...the KA F3 has lots of wires comming out while the SR has a few, so how would I mate this into my KA, because I know I would have dozens of wires not connected.

I think I can follow SR20.hybrids instructions for now, but I have those 3 questions (for now) that I couldn't understand quite yet. Can someone explain this for me? I have included the 2 pictures so if you can, can you point out the plugs that need to be cut off of the SR harness?

http://www.imagestation.com/picture/sra ... g.orig.jpg - SR Harness

http://www.imagestation.com/picture/sra ... g.orig.jpg - KA Harness

Sorry, I don't know how to add pictures here...

[AznRide]

no one? not even a comment of anything?

[ItzGenX]

Those directions there are pretty detailed. It even comes with pictures of the plug ends you need. All in all, I think it speaks for itself. Just look at your plugs and compare to the pictures to see if you got the right ones.

[Cyberkreig]

I cant help you find what your looking for. Just take your time, go by the guide and good luck!