SR Power Steering Pump

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
RiceBurner98sC
Posts: 59
Joined: Wed Feb 11, 2004 3:20 pm
Contact:

Post

Does anyone know where I can find a PS pump for a redtop SR? I've been googling for hours and cant find squat. I think they are a Japanese order only part but wanted to know if anyone else had any resources.

Also, is there a interchangeable US part that I can cross with...91 SE-R..95 300ZX TT, etc? I would just take it down to Discount, but none of them in the area stock the item for me to compare. If not, then i'll have to get on the horn with Jarco again. Thanks in advance.

Ralph.


Onizuka
Posts: 8450
Joined: Wed Nov 06, 2002 5:24 pm
Car: 91 Nissan S13 coupe SR20DET
89 Nissan S14 hatch SR20DE

Post

http://www.sr20store.com parts out engines.

RiceBurner98sC
Posts: 59
Joined: Wed Feb 11, 2004 3:20 pm
Contact:

Post

Your the man:D

User avatar
slow s13
Posts: 782
Joined: Mon Nov 11, 2002 12:56 pm
Car: cars, photo, music

Post

you can also use a pump from a DE with the pulley turned around.

RiceBurner98sC
Posts: 59
Joined: Wed Feb 11, 2004 3:20 pm
Contact:

Post

Are you positive?

civics91
Posts: 305
Joined: Sat Mar 08, 2003 3:37 pm
Car: cars,cars,cars

Post

yes you can use the ka pump but you need the pully and the bracket from a sr pump i have a sp pump off a black top s13 with the lines i need to sell

User avatar
slow s13
Posts: 782
Joined: Mon Nov 11, 2002 12:56 pm
Car: cars, photo, music

Post

yes, all you need is the SR bracket and you just turn the de pulley around and its all good, I know it works because thats what I run.

UsedToOwn240SX
Posts: 240
Joined: Thu Feb 20, 2003 5:32 pm
Car: Radio Control Racing, Counterstrike

Post

Are you sure slow s13? As I recall, the PS pumps themselves are exactly the same, however, the pulleys are not. They are of different diameter. Civics91 is right.

ItzGenX
Posts: 1204
Joined: Wed Sep 04, 2002 7:46 pm
Car: Smoke Purple 95' S14.5. Powered by the "Iron Man".
Location: Gulfport, MS
Contact:

Post

Yep, I used my stock KA24DE pump and swapped off the SR pump pulley onto it, everything bolts up the same. The only differences between the two motors is the pulley and the bracket/tensioner itself.

User avatar
slow s13
Posts: 782
Joined: Mon Nov 11, 2002 12:56 pm
Car: cars, photo, music

Post

yes im shure, im tellin ya I have the de pulley turned around it works fine, I didnt get a sr ps pump only the braket.

RiceBurner98sC
Posts: 59
Joined: Wed Feb 11, 2004 3:20 pm
Contact:

Post

Thanks guys...though I was installing it using a S13 SR into a S14 chassis, a DOHC S13 KA pump worked fine. I just switced the pulley and the bracket and all is well. Thanks for the info.


Return to “SR20DET Forum (rear-drive)”