SR Not Running

[docktercolin]

Still trying to get my SR to run.Getting good vacuum. Good fuel pressure. Fuel lines are correct (I believe). Inlet between 3 and 4 runners. Discharge to fuel pressure regulator out the front of the fuel rail. Starting to think it may be the maf. If I try to start it with the maf connected, it may run for a few seconds, but when I disconnect maf, it will idle for minutes. Also ecu is going into fail safe and cuts revs at 2500 K. I have tried connecting a ka maf along with the sr maf, but the result is the same. Am I correct that the maf is the problem and does anyone know if I can use a Z32 maf using an apex neo? Was planning on upgrading someday, but don't have the money for a bigger turbo and Jim Wolf ecu right now. Does anyone have an SR maf or Z32 maf for sale?

[duffman1278]

Get another MAF, sounds like the issue.

[docktercolin]

Know of one for sale? Know if the Z32 will work with a neo?

[duffman1278]

I wouldn't mess with a Z32 one yet. Just make sure the stock one works before moving on.