sr fan removal

[slik_s13]

i just recently did a sr swap in my 90 240sx and im going with a electric fan instead of the orginal fan setup. ive takin off the fan off, but i cant take the clutch part off of the pulley i know i took off the four bolts. is there anything else i am missing. thanks for the info

[9240sx]

Just give it hell .It will come off,Im sure its just rusted on there.

[mmashburn]

I removed mine awhile back and cant remember exactly what I had to take off. It was straight forward though. If you get an electric fan that mounts to your radiator you should be able to ditch the stock fan shroud and free up some room if you want. If you still need help then post a pic of where your at now.

[9240sx]

Its just those four 10mm nuts that holds it to the waterpump pulley..

[slik_s13]

thats what i thought at first, just those four bolts and pull it off. i'll have to put some wd-40 to break up that rust. i was just afraid that if i hit it i would mess up the water pump. but i'll give it a shot it wasnt born on there. thanks for info

[slik_s13]

opps didnt realize it posted already