Sportmax 501 Sportmax 002 SEARCH HERE

[Shanejenkins1]

I have noticed that the sportmax 501 and sportmax 002 have been searched ALOT! There is not really a great tread for the details of the wheels on the cars....So....here is a desent attempt of filling in the holes. I have searched alot.

Sportmax 501

Color: black, gold, red, gunmetel, and silverSize: 15in tall 8in wide (15x8) OR 16in tall 8in wide (16x8) Offset: +15Best tires: 225/50/16s Material: AlloyNotes: Almost flush with the car. Finder rolling is optional.

PICTURES: These pictures I stole from threw out the site. Sorry if its your car.

16in wheels on a coupe

15in wheels on a fastback

Sportmax 002s

Color: Black, sliver, gunmetel, and redSize: 16x8 or 15x8 Offset: 0Best tires: -- same as aboveMaterial: AlloyWeight: 16lbs each

PICTURES








Modified by Shanejenkins1 at 7:08 AM 12/14/2007

[crapanese]

i know your trying to be helpful but it really woulda been alot more helpful to at least label as a 15" or a 16" wheel.

[tattman77]

15x8 0 offset



I am currently rebuilding the front end since it was hit on the pass. corner

[Kalypso]

tattman your coupe is nice

id like mine to sit nice and low like yourshow thick is your exhaust.

[wzntha]

.

[Nisxsz]

With an inch drop it wouldnt look good imo. Rather go with the 501's 16x8 +15. 205-215/50 tires.

[Nisxsz]

Good post man. But i still would like to see 16x8 SportMax 501's on a pignose hatch. If anyone's got pix please post. thanks.

[ShootToKill]

sorry if i am digging up the dead here, but can someone give me a "flushness" view of the 002. either coupe or hatch and 15 or 16 does not matter either.

[ebalita]

Can anybody post 501's with Tiens or Eibach Proline Springs? I have 16x8 with 195s. Thanks.

[Flicktitty]

LMAO.....

hahaha

who woulda thought a SPORTMAX thread would have a Ad on the bottom for WHEEL REPAIR

hahahahahaha EPIC!

[yourmomsrps13]

no one has said if these fit Z32 calipers anywhere..........

[scole]

no one has said if these fit Z32 calipers anywhere..........

Not a chance.

[yourmomsrps13]

Not a chance.

not a chance that they fit with z32 calipers? not even with a bit of spacing?

[redtop240]

not a chance that they fit with z32 calipers? not even with a bit of spacing?

How come my 501's fit. I have the 16*8 with 225/16/45 Toyos, and HR lowering springs w a 1.5" drop all around and KYB AGX'S on. Just wondering.

[redtop240]

Let me re-state that last post, I have q45 calipers, my bad. But hey they fit them. HAHA

[yourmomsrps13]

Let me re-state that last post, I have q45 calipers, my bad. But hey they fit them. HAHA

fellow PA you should swing by import intelligence in west chester and let me try a rim on, i have all diferent size spacers and what not to see what i need to clear the Z32s.

[Armstec_S13]

sorry i know ol

15x8 0 offset



I am currently rebuilding the front end since it was hit on the pass. corner

sorry i know old post but whats the tire specs on there? i love the way your car looks like that thanks

-jessie

[Kalypso]

dont worry, he ignore me to

[Rex]

sorry i know olsorry i know old post but whats the tire specs on there? i love the way your car looks like that thanks

-jessie

In this thread he said this

sportmax 002 15x8 0 offsetnitto neogen 205/50/15

[CRyan]

Seeing as this thread is on the topic of sportmax wheels - anyone put a set of 002's on kouki?

You all might think it looks bad - but I like the look of the wheel and I just think i would look great in either black or red with my car.

And whoever doesn't decide to bash my statement above - what specs would you say I would need to run (granted I am wanting to run a 16" wheel) to be close to flush (without fender roll) to the fenders?

Pics would also be appreciated if anyone happens to have them on a kouki.

[240lookis]

ive seen a pic of them on a kouki. i dont think it looks the best, but its your car. they could probably be made to look good.

you'd want to get the 16x8 +0 offset.

one thing i dont understand is when people say

to be close to flush (without fender roll) to the fenders?

why no fender roll? i dont understand? it is EXTREMELY easy. you can run the 16x8 +0 and they will be pretty flush, but they might rub depending on how low you are. rolling your fenders is really easy.

[CRyan]

ive seen a pic of them on a kouki. i dont think it looks the best, but its your car. they could probably be made to look good.

you'd want to get the 16x8 +0 offset.

one thing i dont understand is when people say

why no fender roll? i dont understand? it is EXTREMELY easy. you can run the 16x8 +0 and they will be pretty flush, but they might rub depending on how low you are. rolling your fenders is really easy.

Because a fender roll is bending an OEM quarterpanel/fender. I'm not to big into it - And I would do it if I didn't have the large dent filled with bondo on one driver side QP. . .

[CRyan]

And mind you - I see flush as with the fender well - not making the fender well come out to fit my wheel - I dunno. Seems silly.

I don't have a huge drop on the car - but I'm looking to purchase some sportlines that state a 1.7 and 1.4 in back. Too much with that offset and wheel?

[jdm_profile]

so what tire size is good for the 16 inch 002's? do u have to pull? and will it rub the fender liners in the front?

[AZ89two4Tsx]

225/50 or something close is the norm for 16x8.

16x8 +0 will require a fender roll, but depending on preference, a pull is optional. If you don't pull them, you'll need to run some camber.

[jdm_profile]

teddy ran a 195 tire 50 series in front...i think I want to run a 45 series will that look good?i want to make sure it sits flush.no radical camber.and i want to run my fender liners

[jdm_profile]

this is an old thread but ohwell..got my wheels in yesterday 16x8 0 offset. 2mm spacer in back. 195/50/16 falken 912's rolled not pulled.

[usmctankmech]

hey how much do you have to roll your fenders to make the 16x8's fit? im lookin to buy a set to put on my silvia.

[RustspecS13]

Which ones? The 002s will need a roll and I have 501s and I haven't touched my fenders, other then taking off my front liners.

I have 16x8 +15 501s. I have 205/55/16's and I will be switching to 215/45/16 RT-615s

I'll be working on it tomorrow so I'll grab some pics. But its perfectly flush no work required.

I am how ever going to use a 15-20mm spacer so i can run Z32 brakes all around, and roll my fenders. Right now I have q45's all around and they fill out with my 16s perfectly.

~Alex

[usmctankmech]

the 002's 0 offset.