SPL Parts is now a NICO Sponsor!

[Nismo_Freak]

Hi guys, we're now a sponsor for NICO.

Just to give you guys an idea of the suspension parts we supply here's a small list of items:

Our Line of Suspension

- SPL Adjustable Tension Rods- SPL Adjustable Rear Upper Control Arms (for S13, S14 coming soon) - SPL Adjustable Rear Toe Arms (like camber, the toe adjustment runs out to fully correct the toe) - SPL Traction Rods - SPL Lower Control Arms (Front and Rear, for those looking to do it all) - SPL Aluminum Subframe Spacers (slotted, for easy installation in less than 30 minutes) - SPL Aluminum Subframe Bushings (the full bushing that replaces the entire subframe bushing)

Brands

+ JIC - We are a dealer for JIC Suspension + Nismo - We carry the full line of Nismo including the popular Power Bar+ Zeal - We are a dealer for Endless/Zeal + Topline Aragosta - We are one of the ONLY dealers in the US for this brand of suspension

We also have our own line of braking components.

We offer a massive brake upgrade that utilizes OEM 4-pot 300Z calipers- 12.8" R33 GTR Upgraded Rotors (choose between single piece cast or a special 2-piece aluminum hat design to save unsprung AND rotational weight)- SPL caliper brackets All you need then is a set of 300Z, S14 (JDM and Euro Spec), or Brembo GTR calipers and a set of our stainless brake lines!

Other braking components:- Stainless Steel Brake Lines (covered, unlike the competitors'!)- Endless Brake Kits- Endless Brake Pads- Hawk Brake Pads

Visit our webpage to learn more info or see pictures of the products! http://www.splparts.com

Feel free to order online, just be sure to include the word "NICO" into the comments box so I know it's a NICO member!

OR

Give us a call, also be sure to mention your from NICO!

OR

Email me... [email protected]

[bob marley]

Wow, thats good stuff. I sent you an e-mail.

Johann

[Nismo_Freak]

Johann.. bear with me... I just got the email addy and I'm having issues sending emails.

[Nismo_Freak]

Guys/Gals, go ahead and send email to me at [email protected] ... I'll reply using my main email till the reply function is fixed on my SPL account

[Nismo_Freak]

I now have a specific AIM setup for answering questions.

Add me to your lists

Splparts .... pretty easy to remember I think

[rico05]

I want to cruise over to Round Rock and check yall out one day over X-Mas break. What is your street address?

[Dano]

looks pretty sweet Alan, may be talkin to u about some parts soon:) glad to see u became a sponsor!

-Dan

[PROJECTRB240SX]

SO ARE YOU GUYS GOING TO HAVE ANY DEALS FOR US NICO GUYS?

[Nismo_Freak]

We are like PDM in the fact that we offer the lowest possible price we can go, especially on our suspension components.

Later on when the Yen has a better exchange rate we might be able to do more as far as deals, but right now we can't.

Sorry,Alan

[Nismo_Freak]

looks pretty sweet Alan, may be talkin to u about some parts soon:) glad to see u became a sponsor!

-Dan

Good to hear Dan, keep me updated on your situtation.

[Nismo_Freak]

SPL PARTS350A Old West DriveRound Rock TX 78681

That's our addy

We're not the largest operation by any means but we try to make up for it with good prices and good service.

[Nismo_Freak]

1-866-SPL-PART

Is our toll free number

Please mention your from NICO

[crzycav86]

Nice site. Just wondering, how much do you pay to be a sponsor?

A little note about the site... It seems a bit disorganized. On some pages, it's kinda hard for me to figure out which prices go for which part, however on other pages, parts are divided by a horizontal rule which is good. I'm thinking that there should be a little more uniformity in how the pages are layed out. Its a lot more readable that way IMO.

[Nismo_Freak]

Yeah, I don't really have any control over the site... ... but thanks for the feedback and I'll let the web guy know.

[F4ucc]

Two Thumbs up for SPL.

So far, I've got Nismo Front Brace, Kazama subframe spacers and Rear adj toe control arms. Always quick response and fast shipping, and very reasonable price. Of course the quality of products are top notch too.

Well, it's good to have a great vendor around for us 240sx community.

later

[Dystopia]

i will be ording some things soon to finish up my setup... glad to see your on a sponsor

[Exar-Kun]

mmmmmmm dystopias avatar

*drool* boobies!

er, what?oh yeah, spl parts rules.-chet

[Dystopia]

damn it chet your sig is making me read sinfest again i kicked the habit but now its back

[Exar-Kun]

-chet

[Nismo_Freak]

Dystopia ... just a reminder... be sure to put that your from NICO when you order.

[Dystopia]

i will be giving you a call and i think i know another place you could stir up some bissiness

[EnzoRWD]

u got a price for those s13 lower control arms? -Enzo

[Dystopia]

its on thier site

[Exar-Kun]

christ I love that avatar. I want a big one for the backround of my computer. I'd just sit here and drool all over.

-chetalan: I'll be contacting you guys soon probably.

[EnzoRWD]

errr i meant front lca's.... with metal balls joint? -Enzoo

[Nismo_Freak]

We haven't produced any more of the front LCA's for the S13s. However we do know they will cost ~ 800.

[Nismo_Freak]

i will be giving you a call and i think i know another place you could stir up some bissiness

Where's that?

[I H8 UR DSM]

alan howbout some custom top mount exhaust manifolds, t4 flanged

[Nismo_Freak]

alan howbout some custom top mount exhaust manifolds, t4 flanged

I could bring that up next time I meet with everyone

[Dystopia]

christ I love that avatar. I want a big one for the backround of my computer. I'd just sit here and drool all over.

there are some other ones i have used in the past... back in the day before nico was VB...

Where's that?

I will send you a PM err no email me cause PM is turned off here

[email protected]