SPL Customers

Post by **Nismo_Freak** » Fri Sep 02, 2005 3:28 pm

Seen alot of SPL customers lately... would just like to say thanks to those of you running our componentry.

Post by **veilside180sx** » Fri Sep 02, 2005 5:14 pm

Your'e welcome, I love SPL products.=)

Website · Post by **Bronze MFP** » Fri Sep 02, 2005 5:16 pm

They can't help it if they rock Great products and customer service can't be beat.

Post by **BadMojo** » Fri Sep 02, 2005 5:24 pm

Nismo_Freak wrote:Seen alot of SPL customers lately... would just like to say thanks to those of you running our componentry.

I've only bought a few little things from SPL, but the stuff is always great and the service rocks. Shipping is quick and stuff is packed very well. Once I get the car running properly, I'd like to buy some suspension goodies.

Post by **phuphyter** » Fri Sep 02, 2005 5:52 pm

I hope SPL is around forever.

To SPL!

Post by **Nismo_Freak** » Fri Sep 02, 2005 7:05 pm

Just to fill you guys in on a little info.

SPL is moving to a larger location, and many good things hopefully will come of this location.

Post by **GhostDriver** » Fri Sep 02, 2005 8:18 pm

Too bad you guys don't carry Bride FG rails. Mine is either on order (since 8/1) or MIA.

Post by **Red coupe** » Fri Sep 02, 2005 9:46 pm

quality+ free shipping = win"our"....? I though you were no longer with them???

Post by **chmercer** » Fri Sep 02, 2005 9:51 pm

bump for splparts. hey guy who wants fg rails, when kuah gets back from vacation, give him a call, he can get thoes. new location should be badass, its right next to a machine shop

Post by **veilside180sx** » Sat Sep 03, 2005 1:22 am

The free shipping was taking away when I ordered stuff the other day. Kuah needs to add install instructions for the "solid aluminum subframe bushings". I searched everywhere on the web and couldn't find a single place that said you had to remove the inner retainer for the stock bushing.

Once that was cut out it was fine.=)

Post by **navysnail** » Sat Sep 03, 2005 3:48 am

vielside: look at the stickies at the top of this page[

and like everyone else says, SPL rules!

Post by **574-240sx** » Sat Sep 03, 2005 5:46 am

SPL is ok for the cost. Customer service is great. I have had numerous problem with the Tie Rod ends though. Hope better and great things come from the new location.

Post by **skydragoness** » Sat Sep 03, 2005 3:15 pm

I like SPL a lot, great people, fast shipping. I was a little annoyed with the rear brake lines i got (one side was a tad shorter than the stock line) but the products themselves are really nice. No one else does that Teflon sleeve thing which just looks ultra-cool.

Post by **grimple1** » Sat Sep 03, 2005 6:23 pm

love my 5zigens from spl. great company, they'll "see" me again.

Post by **Exar-Kun** » Sat Sep 03, 2005 6:56 pm

MORe 35Z part bishes!

other than that, SPL=goodness.

-CHet

Post by **chmercer** » Sun Sep 04, 2005 8:26 am

574-240sx wrote:SPL is ok for the cost. Customer service is great. I have had numerous problem with the Tie Rod ends though. Hope better and great things come from the new location.

the version one rod ends had problems but thoes were discovered pretty quickly. if you are having problems with the version 2 rod ends it is due to installation error.

Post by **240DRFT** » Sun Sep 04, 2005 6:57 pm

i like spl...i always recommend them to people here on nico. and i bet they will see some business from me, as soon as i get some money

Post by **BryanGrigsby** » Tue Sep 06, 2005 5:44 am

I think I about maxed out on some SPL parts. I just finished my install of everything, so far so good. The guy at the alignment shop was impressed, though he thought my springs were too stiif for a daily driver. LOL. To each his own, right...

I really apreciate everything guys! The car is handling beast!

Post by **BryanGrigsby** » Tue Sep 06, 2005 5:45 am

Post by **BryanGrigsby** » Tue Sep 06, 2005 5:48 am

Underneath

Post by **BryanGrigsby** » Tue Sep 06, 2005 5:49 am

Underneath front

Post by **grimple1** » Tue Sep 06, 2005 8:24 am

^^ that's a sharp lookin' 240. spl for teh win

Post by **Nismo_Freak** » Fri Sep 09, 2005 6:02 pm

Exar-Kun wrote:MORe 35Z part bishes!

other than that, SPL=goodness.

-CHet

We have a new 350Z subframe, and a set of new front and rear spindles.

We also have our blue 350Z that we ran 12's with N/a that we will be testing all the parts on.

I say "we" and "our" mainly because I do work occassionally with Kuah, like now for example. Me and another friend of mine are covering the orders while he is out of town.

Post by **Nismo_Freak** » Fri Sep 09, 2005 6:04 pm

574-240sx wrote:SPL is ok for the cost. Customer service is great. I have had numerous problem with the Tie Rod ends though. Hope better and great things come from the new location.

Yeah, we have been revising and reworking those.

Sometimes you don't get solid feedback back when parts are tested and issues happen. I think Kuah has done an excellent job of revamping them quickly and providing those with problems solutions ASAP.

Post by **Exar-Kun** » Sat Sep 10, 2005 3:00 pm

ALan, tell Kuah to start carrying some more little things (like ARC stuff!) for the Z33, and you can keep my credit card on file.

-Chet

Post by **Nismo_Freak** » Sat Sep 10, 2005 7:13 pm

Exar-Kun wrote:ALan, tell Kuah to start carrying some more little things (like ARC stuff!) for the Z33, and you can keep my credit card on file.

-Chet

He can already get that stuff, it's just not up on the website.

Email him about it.

SPL Customers

SPL Customers

Re: SPL Customers (Nismo_Freak)

Re: (Nismo_Freak)

Re: SPL Customers (Nismo_Freak)

Re: SPL Customers (Red coupe)

Re: (574-240sx)

Re: (skydragoness)

Re: (grimple1)

Re: (574-240sx)

Re: (240DRFT)

Re: (BryanGrigsby)

Re: (BryanGrigsby)

Re: (BryanGrigsby)

Re: (BryanGrigsby)

Re: (Exar-Kun)

Re: (574-240sx)

Re: (Nismo_Freak)

Re: (Exar-Kun)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums