speed sensor hook up

[RBadam]

first of all i searched and found a good thread but almost all the pics where x'shttp://forums.nicoclub.com/zerothread?id=136761

anyways im sick of driving around with no speedo or tach, and id have no problem sending my gauge bezel to ls auto but my speedo and tach dont even move, now i went to the transmission and found 2 clips that were not connected, one off the transmission(speed sensor i think) and one just hangin(guessin from speedo) they are not compatible clips, should i splice the one from the transmission to one i belive to be from the speedo? how did most of oyu guys get your speedos to move after the swap??ill have pics up this weekend before i do anything, im just looking for some help before i get into itthanks

[Darius]

so did you buy the car after it had the swap or did you pay a shop to do it? Since you do not have the clips, I would not bother trying to find compatible ones unless someone is certain there's a USDM transmission that shares them. You can always just cut off the existing speed, reverse, and neutral position sensor clips and wire them into new clips. I ran my reverse and neutral wires through my center console and the speed sensor into the stock wiring harness location. Either way you do it, you will have to wire it yourself.