Spec V photos

A great resource for Nissan Sentra, Infiniti G20, 200sx, Pulsar, NX1600, NX2000, Tsuru, Primera and Sunny owners.
User avatar
jEzTeR
Posts: 7645
Joined: Sun Sep 15, 2002 2:34 pm
Car: 07 FX35 - 02 Altima 3.5se - 93 240sx Hatch
Contact:

Post

I took some photos of my Spec V today.(as I do almost every time I drive it) The turned out pretty good.Ill just post up my Imagestation site they are at the end of this album.http://www.imagestation.com/album/?id=4290504781


nlzmo400r
Posts: 4906
Joined: Wed Feb 12, 2003 12:23 pm
Car: cars

Post

gorgeous as usual, any luck with the mods?? have u decided on the teins or JICs?

User avatar
jEzTeR
Posts: 7645
Joined: Sun Sep 15, 2002 2:34 pm
Car: 07 FX35 - 02 Altima 3.5se - 93 240sx Hatch
Contact:

Post

nlzmo400r wrote:gorgeous as usual, any luck with the mods?? have u decided on the teins or JICs?
No luck yet but I did decide on the Teins.Im getting a quote on powdercoating my wheels tomorow.Id like to do that when I get new tires if its not too expensive.

nlzmo400r
Posts: 4906
Joined: Wed Feb 12, 2003 12:23 pm
Car: cars

Post

how much did u pay for the teins? a buddy of mine is looking into those for his 99 eclipse, also, my stepdad got new tires for his maxima today: 225/5o/r17, michellin pilots, and he paid 175per tire

User avatar
OneFastStanza
Posts: 1592
Joined: Wed Aug 14, 2002 1:06 am
Car: '02 SE-R Spec V, '92 Stanza, '97 Maxima, '04 Vue Redline. '04 F250

Post

Nice pics Dane :ylsuper

User avatar
jEzTeR
Posts: 7645
Joined: Sun Sep 15, 2002 2:34 pm
Car: 07 FX35 - 02 Altima 3.5se - 93 240sx Hatch
Contact:

Post

I have not got the Teins yet but I'm going to try and get them for about $1000.That price on those tires sounds a bit high for 50 series?

Hey Cory!When are you all going to do another photo shoot?I'd like to get in on it next time.If not to get some more shots of my car then to get some good ones of everyone elses.;)

jpalm
Posts: 110
Joined: Mon Apr 29, 2002 3:12 pm
Car: Cars, Motorcycles...SPEED!
Contact:

Post

Here is a couple shot of a few of my mods:

Magnaflow SS Catback

Place Racing Urethane Motor Mounts

I'd have more but I haven't downloaded them yet.

Here is my homepage that hasn't been updated in awhilehttp://www.cardomain.com/membe...0SE-R

nlzmo400r
Posts: 4906
Joined: Wed Feb 12, 2003 12:23 pm
Car: cars

Post

jEzTeR wrote:I have not got the Teins yet but I'm going to try and get them for about $1000.That price on those tires sounds a bit high for 50 series?

Hey Cory!When are you all going to do another photo shoot?I'd like to get in on it next time.If not to get some more shots of my car then to get some good ones of everyone elses.;)
i thought that price was kind of high, but he said he checked a couple of places and it was the cheapest he found for teh pilots, and im not sure if tha was 175per tire mounted or not? i dunno, but i guess if he has the money, the tires are worth it, espeially hauling around a wife and 3year old kid, and besides, they look badazz

User avatar
jEzTeR
Posts: 7645
Joined: Sun Sep 15, 2002 2:34 pm
Car: 07 FX35 - 02 Altima 3.5se - 93 240sx Hatch
Contact:

Post

jpalm wrote:Here is a couple shot of a few of my mods:

Magnaflow SS Catback

Place Racing Urethane Motor Mounts

I'd have more but I haven't downloaded them yet.

Here is my homepage that hasn't been updated in awhilehttp://www.cardomain.com/membe...0SE-R


Nice Jeff!How did the motor mounts effect your take off?I've herd that they almost eliminate wheel hop.How much are a set?That may be a better first mod than the Teins.My future mod list was 1-Teins2-tires+powdercoating wheels3-CAI4-hedder5-motor mounts6-NOS7-new tires LOL

User avatar
OneFastStanza
Posts: 1592
Joined: Wed Aug 14, 2002 1:06 am
Car: '02 SE-R Spec V, '92 Stanza, '97 Maxima, '04 Vue Redline. '04 F250

Post

jEzTeR wrote:I have not got the Teins yet but I'm going to try and get them for about $1000.That price on those tires sounds a bit high for 50 series?

Hey Cory!When are you all going to do another photo shoot?I'd like to get in on it next time.If not to get some more shots of my car then to get some good ones of everyone elses.;)


I don't know I haven't really thought about it. Grant was the one that headed up the last one but we can try to get another one going.

Oh and sorry I didn't reply to your e-mail yet but I will just do it here. Yeah that would be cool to get a local SE-R AutoX team. Of course we would have to coerce Mike (RED_DET) also. I jyust got magnetic numbers though :eek: but I still haven't decided if I want to keep running in the SM class or bounce down to the DSP or STS class if I take off my hood. I figure if I keep running novice that I will just habng in the SM class for now cause that is what I made my numbers.

jpalm
Posts: 110
Joined: Mon Apr 29, 2002 3:12 pm
Car: Cars, Motorcycles...SPEED!
Contact:

Post

jEzTeR wrote:Nice Jeff!How did the motor mounts effect your take off?I've herd that they almost eliminate wheel hop.How much are a set?That may be a better first mod than the Teins.My future mod list was 1-Teins2-tires+powdercoating wheels3-CAI4-hedder5-motor mounts6-NOS7-new tires LOL


It was actually the second mod I did back in the fall (the first being AEM intake). I have no wheelhop whatsoever and can launch at pretty much any RPM I want. Of course, the highly the RPM launch the more wheelspin/smoke/etc. Once I need new tires I get video of a nice smokey burnout for sure.

I think they ran me $230 in a group buy (got 15-20% off I think). I got one of the first 3 sets that Place Racing made. They are worth it if you don't mind the added vibration throught the car. Its not THAT bad, I just usually roll my right foot on the gas and brake at the same time to idle a little bit higher and it gets rid of it.

Teins are on my list to do in the future, just got save some money! I have too many projects and hobbies! Header and tires are next.

User avatar
Altiman94
Posts: 5895
Joined: Sun Jun 22, 2003 12:13 pm
Car: Paintball, cars, outdoor sports

Post

I like the 02-03 specs alot, Jezter I'm assuming your powdercoating your wheels gunmetal or black?

gibbo80
Posts: 598
Joined: Sun Sep 01, 2002 6:26 pm

Post

in some magazine they tested the spec and they used silicone to harden up the motor mounts, any one else heard about that. Image station is down :(

User avatar
jEzTeR
Posts: 7645
Joined: Sun Sep 15, 2002 2:34 pm
Car: 07 FX35 - 02 Altima 3.5se - 93 240sx Hatch
Contact:

Post

Hrmm I had not herd about that...???Yeh I was tring to mees with Imagestation tonight also.;)

jpalm
Posts: 110
Joined: Mon Apr 29, 2002 3:12 pm
Car: Cars, Motorcycles...SPEED!
Contact:

Post

yeah, they use 3M windoweld. Its a messy process though. I believe there are actual inserts out now. If you search on the Vboard or b15sentra.net

Or just get solid polyurethane mounts from Place racing like me!

User avatar
OneFastStanza
Posts: 1592
Joined: Wed Aug 14, 2002 1:06 am
Car: '02 SE-R Spec V, '92 Stanza, '97 Maxima, '04 Vue Redline. '04 F250

Post

Yeah you can get full replacement mounts from place racing. There are a couple other people selling stuff also. ES makes inserts I believe and one guy on theVBoard (Yamarap) makes full replacements for the front and rear mounts and Cwepunk makes inserts also I believe.

nlzmo400r
Posts: 4906
Joined: Wed Feb 12, 2003 12:23 pm
Car: cars

Post

that sounds like a damn good plan, how hard is it to full them? would u have to pull the motor

User avatar
OneFastStanza
Posts: 1592
Joined: Wed Aug 14, 2002 1:06 am
Car: '02 SE-R Spec V, '92 Stanza, '97 Maxima, '04 Vue Redline. '04 F250

Post

No if you just brace the motor with a jackstand you can just pull out the mounts and fill them (I wouldn't pull them all out at the same time though) and let them sit overnight and pop them in the following day.

nlzmo400r
Posts: 4906
Joined: Wed Feb 12, 2003 12:23 pm
Car: cars

Post

so its an easy one day job?

User avatar
OneFastStanza
Posts: 1592
Joined: Wed Aug 14, 2002 1:06 am
Car: '02 SE-R Spec V, '92 Stanza, '97 Maxima, '04 Vue Redline. '04 F250

Post

It 'should' be but notice I said should. As long as you don't run into problems :D

nlzmo400r
Posts: 4906
Joined: Wed Feb 12, 2003 12:23 pm
Car: cars

Post

well hopefully if i decide to tackle this, i wont run into any problems

humpy012
Posts: 55
Joined: Mon Jul 14, 2003 4:53 am
Car: Mark VIII

Post

nice looking spec, im glad the one with altezzas isnt yours

nlzmo400r
Posts: 4906
Joined: Wed Feb 12, 2003 12:23 pm
Car: cars

Post

humpy012 wrote:nice looking spec, im glad the one with altezzas isnt yours
actually i thoght the 'blacked altezza' looked prety good, but the chrome's were horrible

User avatar
PalmerWMD
Posts: 18383
Joined: Mon Apr 29, 2002 3:14 pm
Car: 2004 350Z

Post

Your photoalbum seriously rocks !:ylsuper.

I saw pics of the NICO skyline, I didnt know you had been down there yet.

Fred...:)

User avatar
jEzTeR
Posts: 7645
Joined: Sun Sep 15, 2002 2:34 pm
Car: 07 FX35 - 02 Altima 3.5se - 93 240sx Hatch
Contact:

Post

I have not.That is a photo I got off of the Nopi site I think!I have had it for a while.I would love to see it in person.

nlzmo400r
Posts: 4906
Joined: Wed Feb 12, 2003 12:23 pm
Car: cars

Post

ive never actually seen a skyline in person, well, not a GTR anyway, i saw a few gts and one gts-t in cayman

BenSR2095Se-R
Posts: 68
Joined: Sun Jun 08, 2003 3:40 pm
Car: Drag, chillen wit my wifey, workin on cars with friends

Post

nice ride man:)

Ben

nlzmo400r
Posts: 4906
Joined: Wed Feb 12, 2003 12:23 pm
Car: cars

Post

i see your car says 'under construction', wahts goin on with her?

BenSR2095Se-R
Posts: 68
Joined: Sun Jun 08, 2003 3:40 pm
Car: Drag, chillen wit my wifey, workin on cars with friends

Post

turbo project on the way to finish her off:)

Ben

nlzmo400r
Posts: 4906
Joined: Wed Feb 12, 2003 12:23 pm
Car: cars

Post

sweet, can u reveal any numbers as of yet, or rtpe of turbo?


Return to “Sentra Forum / Infiniti G20 Forum / Pulsar / NX Forum”