spacing for the 350z whees on 89 coupe

[coupe240sxguy]

Trying to find a pic of the exploded view of the rear suspension on the 350z. This is mainly to find out if and what stuff i will need to get to fit these wheels, http://www.wheelcollision.com/wccpix/62456.jpg on my coupe. Still in stock 4 lug, doing a rear conversion to 5 lug to fit the wheels on. They are 05-08 350Z/35TH ANNIV 18x8.5 Flat 5 Spoke w Recessed Center... only need to do the back conversion.

[Kckouki]

.........

Search

[coupe240sxguy]

While I was searching for the answer and not sitting on my hands I came to check in on the status of this topic and noticed that some one just upped their post count. I ask myself why would someone waist their time to post what.... nothing. Don't post if it is not going to help! I am directing this at you!

[Kckouki]

I would guess you would be directing towards me, as im the only one who has posted.

This has been covered a million times on how to do a 5lug swap, search, douchfag.

[coupe240sxguy]

not looking on the how to do the swap but on the fitment of the wheel... would it hit the strut/shock if i used the 300 strut and spring setup or would I have to use the 350z setup to fit the 8.5inch wide wheel... yes I know that they are thesamebolt pattern on the wheel

[Kckouki]

You wouldnt have to run 350z rear setup, I dont even know you could.

It might rub strut/shock combo, get coils.Or spacers, but those wheels will be semi-flush on s13 without spacers.

[coupe240sxguy]

Name calling is so childish, you need to quit with the names. why did you call me names... probably because I pissed u off. OH WELL

[coupe240sxguy]

THANK YOU FOR THE NICE COMMENT BACK

[simmode1]

Ok guys. Calm down. I can't answer this question with much certainty, but I know the Anniversary wheels fit on s14's with shock/strut setups cuz I'm planning on getting them for my Zenki. I doubt it would be different on an s13. But if it is... Hell that 8.5 wheel will still be a little sunk in the rear w/ that high offset. Throw a spacer on that hoe and get it flush!

[coupe240sxguy]

thanks yo... i know that the s14 has a slightly different setup in the back, but if it fits on the s14 it surely will fit s13 thanks for clearing that up also is that ur stock seup?

[coupe240sxguy]

howdy neighbor... i am in bedford

[simmode1]

also is that ur stock seup?

Huh? I don't understand your question...

howdy neighbor... i am in bedford

Cool! I'm right of 360! Were you at the Pioneer & 360 meet this Wednesday? Hit me up on myspace if you got one. Just click my avatar for the link...