Somthing kind of crappy about Ichiba 25 mm s13 spacers.

[RB20DETodd]

Since the stock wheel studs are a little longer that the spacer, my wheel mounted on the studs pretty much, and they arnt exactly the same length so i had a ballin wobble effect on my rear wheels, i had co cut about 2-4 mm off stock stud so the wheels mounted flush on the spacer, dremel worked like a champ, or a hacksaw whatever, thought id let you guys know, but quality spacers no doubt.

[C-Kwik]

Good heads up. This kind of issue can be dependent on the wheel too though. Many wheels have a opening behind the areas where there are no lug holes. And these can be of differing sizes.

[AZhitman]

Also, make sure you use short open-ended lugs.

[RB20DETodd]

Also, make sure you use short open-ended lugs.

yeah i used the lugs they gace for the spacer to brake disc and my korugens for the wheel to spacer.