Someone with some money and time try this

[toki]

Get:

(1) JGS log manifold(1) Series 4 RX7 (87-88) turbo(1) 4:1 FMUget someone to fab up a downpipe if you can'tsame with a pipe directly from the turbine to the intake

boost the stock 5.7psi non-intercooled

It should work just fine. Spend $100 and go dyno it with a wideband and show us what you get.The only thing that might go wrong is injector failure over time, but I don't believe you will step over 90% duty cycle.Oh and it might be pretty laggy due to the fact it's a .96 A/R or around that.

That is my theory, someone go test it.

[Tictakman]

man, from the looks of it(sig) you might try it yourself. seems like you have a nice collection already...

Zak

[Joe]

Toki stop lying you dont own and god damn porsche's. i know you damnit. you have NEVER mentioned a porsche.

[Checkered-Member]

haha he lives in Tucson and has 3 porsches, and a 89 hatch i call B.S.

[toki]

hahaha. thats been in there for soooo long, and no one has said anything until now.

[hannibal]

911 GT4?? Of course, its BS...

What kinda turbo came on that RX-7??

[red240ne]

what theory are you trying to prove? I don't get it...

[toki]

that you can run 6psi non intercooled on stock everything for a whopping $600 and be fine? everyones all concerned trying to make these hoopdy sidemount setups or using these giant cores that lack efficiancy for 7 psi or something. On the KA there is basically a line in the sand where you have to start replacing every damn thing in the engine bay to get it to boost...this setup would possibly provide an alternative. All the parts are inexpensive and easy to find, so it's the ultimate 'junk yard' setup.

[Ghettokracker71]

http://www.gladmanperformance.com

You can run 7psi without an I/C and make decent power. Check out that site+ watch the vid.