Some wiring help please.

Discuss the RB20, RB25 and RB26 series engines.
Miata Master
Posts: 82
Joined: Thu Feb 03, 2005 7:01 pm
Car: 240sx w/ rb25det SOON

Post

Ok so I went through the 8 steps best i could. Here are the problems i'm having someone please help. I do not have the plug I am supose to cut two feet off.

First i couldn't find the grey/red wire to connect to the orange wire from the brown plug, white for me since I am 89. I found a grey/pink wire and a red/white wire on the white plug but nothing else.

Second the starter wire for me is black/yellow so i just used it.

when I ground the battery the car beeps when the key is in and the horn works (found out on accident).

I am also using butt connectors till i know it is hooked up right and was then going to solder them , would like to start it today.

the tail lights are on not sure why. when I turn the key I hear a click back in the dash.

Also i switched from auto to manual and dont know what to jump for the park sensor someone please help.


Miata Master
Posts: 82
Joined: Thu Feb 03, 2005 7:01 pm
Car: 240sx w/ rb25det SOON

Post

I have an 89 Hb, and rb25 with rb20 trans someone please help

Miata Master
Posts: 82
Joined: Thu Feb 03, 2005 7:01 pm
Car: 240sx w/ rb25det SOON

Post

Figured out what to jump for the automatic park sensor.


Return to “RB20DET / RB25DET / RB26DETT Forum”