Some suspension parts questions

[Bosrudorfer]

hey guys,

well after my curb incident I have been beefing up the car with aftermarket **** so it doesnt happen again. cars running and everything is fixed. anyhow I'm going with these parts and was hoping for some comments or suggestions. Thanks

SPL V2 tension rods with brake deflectors (front) {ordered}Tein inner/outer tierods (front)KTS coilovers (running now some Tokico adjustable shocks/springs)17x9 +20 wheels wrapped in 235/45/17 g-force sports {on the car}Tanabe front and rear strut bar {on the car}Cusco pillar side barSuspension Techniques front and rear swaybars

Now anything else I should work on? What about the rear?

Also is the cusco lower bar, radius, fronts any good?http://www.240sxmotoring.com/culobarafrs1.html

Thanks
Modified by Bosrudorfer at 3:10 PM 5/24/2006

[mmm240]

i've got some gr2 struts and tein s-tech springs waiting to be installed. in the meantime i'm tracking down all the rubber pieces for the struts. boots front/rear and front mounts ran me 180 shipped from tire rack, rear bushings from nismo were 37 shipped, and front/rear gaskets, rear mounts and rubber seats were 160 from nissan dealership. price totaling almost 800 bucks, probably should have just went for some coilovers

but i say replace the rubber parts like me cause my 14 year old car could definetly use it i'm sure

[mmm240]

duh, just looked closer at your post, i guess maybe just some strut mounts then

[rb20det_pwr]

thats pretty much what i want for the front, but for the rear I was looking into upper arms, (adjustable camber) and i dont know wat its called but the toe adjuster on the back, the one where you would have hicas. then when you get it aligned itll be all goooood