Some Safc help

[NFixed85]

Ok so I got a Apexi Safc 2 and I got it running and just a few stupid q's I guess. Can I use a z32 maf on it and I have plans on tuning my N/A ka cause it has no emission and its running rich so I plan on leaning it a bit does anyone has a general set or map I can copy or get close too.

[OutToWinPAHC]

For a N/A KA you dont need a Z32 Maf your not flowing that much and you wont unless your boosting a good bit, which your not. In a whole I dont like SAFC unless its the only option under 1500 and your triggering off boost not bending the AFM

[NFixed85]

well I got 10.5 to 1 pistons and the head has been shaved twice so I know Im pretty close to 11to 1 and thought about a low boost setup in the future I know its totally backwards but just wonder what the SAFC can see if I wired it up you know. Plus I thought about a shorter intake and move the battery could I tweak it to were it doesnt read so much turbulence.Plus I live in BFE so a SAFC is my only option unless I go to JGY.

[OutToWinPAHC]

not sure what BFE is but if your running that high of compression your most likely running on E85 and you would have a stand alone and a map sensor.

[NFixed85]

nah BFE mean (Bum f*** Egypt) but yeah I know e85 would run cooler for the turbo setup but thats just a thought I may just build my other ka block with lower compression