Some one help me with my timeing on my SR

[Gmans13]

Hey guys I'm putting my sr20det back togeather and I was wondering if I have my cams in there right. If some one could help me that would be really great. Also if some one could help me out with some instructions on how to time it after I get it running that would be cool too. The diagram I have included shows how I have my cams right now with both punch markes alligned vertically.

[Gmans13]

I just need to know where the punch marks are supposed to be aligned on the SR I was reading in another thread that the KA is set to Intake 9 oclock and exhaust 3 oclock some one hook me up with the settings for the SR thanks

[S13240]

The correct timing mark is the 2nd one from the right, not the 2nd one from the left.

[SpeedRacer1]

TDC is the far left or second from the left its somewhere inbetween the two. The intake camshaft should be set at 10 oclock. The exhaust should be 12 oclock.

[Cyberkreig]

S13, Second from the right is the correct timing for the igniton. Gmans is asking about cam timing. So he would want TDC, which is second from the left, as his picture shows.

[Gmans13]

Thanks speedracer I'm gonna go set it up right now.

[S13240]

Oops my mistake. Don't pay attention to what I said then. Thanks Cyberkreig for correcting me!

[Gmans13]

sweet she's all tuned up now