So turns out i have a $1500 clutch Sweet!!!

[Beanstalk]

So i am doing my swap and i bought a s13 blacktop from osaka with my buddy who bought the same engine the same time we flipped a coin to see who got what i got the one with no turbo lines but had a t28 and his had cams well i went to change what i thought was a rattling throwout bering but who knew it was an ogura racing clutch and i had never heard ot them so i looked it up and i have the twin disc twin fingered pressure plate with the flywheel its nuts i paid 1750 shipped and got a badass clutch just had to tell someone

[ag240]

It is really hard to understand what you just typed above because there are so many run-on sentences it makes my head hurt a little punctuation would be better so you dont have to real the same paragraph over five times i wish i find a deal like that i mean you dont know when a sentence ends or when it starts what are you gonna do with the motor are you gonna swap it into your existing car good job finding the little treasure in your SR lol @ twin fingered can you understand what i wrote without reading it over?

[silvia_ks_69]

So i am doing my swap and i bought a s13 blacktop from osaka with my buddy who bought the same engine the same time we flipped a coin to see who got what i got the one with no turbo lines but had a t28 and his had cams well i went to change what i thought was a rattling throwout bering but who knew it was an ogura racing clutch and i had never heard ot them so i looked it up and i have the twin disc twin fingered pressure plate with the flywheel its nuts i paid 1750 shipped and got a badass clutch just had to tell someone

It is really hard to understand what you just typed above because there are so many run-on sentences it makes my head hurt a little punctuation would be better so you dont have to real the same paragraph over five times i wish i find a deal like that i mean you dont know when a sentence ends or when it starts what are you gonna do with the motor are you gonna swap it into your existing car good job finding the little treasure in your SR lol @ twin fingered can you understand what i wrote without reading it over?

lol omg...plz no more of this terrible run on sentence on a different note thats a pretty cool find. dont waste it by only doing some lame *** mods like.."going for 230whp"

[ag240]

sarcasm cant be expressed over internet with out html coding like /sarcasm...huh?

[S14toRPS13]

Good find. I'm currently running with a supersingle Os Giken. It holds great, but because I daily drive my car, it's not always fun. Is this going into your daily driver?

[MastaYu]

cool find

[OM3GA]

cool where did you pay 1750 shipped for a blacktop sr? Im looking for a reliable source to purchase a long block from

[cxlumpy]

2nd that!

[burntricer]

osaka jdm is NOT relable.

[ImportBastard]

well at least you know you bought a motor ,that someone in japan beat the living crap outta it. hopefully you don't have any problems with it...goodluck.

[dtowndrifter]

I know how you feel..I thought i had a bad throwout bearing too on my redtop...I purchased a sr from Jhot and it came with a ORC single plate ...uberawsomeness..!

[red240sx90]

well at least you know you bought a motor ,that someone in japan beat the living crap outta it. hopefully you don't have any problems with it...goodluck.

hahahah thats what i was thinking!

[Ilvemynissan]

I also got a suprise when I got my motorset. Mine came with an OS Giken. *BALLER*

[Thoughtful_One]

Do you think people with $1500 cluthes drive like grandmas...?

[s13rb25det]

my rb25det came with a OS GIKEN twin disc clutch but it was trashed so I had to get a 300zx cluth + flywheel.

[silvia_ks_69]

I also got a suprise when I got my motorset. Mine came with an OS Giken. *BALLER*

OS Giken FTMFW! except its a little noisy lol. but w/e its holds a helluva lot of power!

[Beanstalk]

Yeah, sorry about the run on sentences. As for punctuation i was unaware this was teacher .com lol J/K but i have been running the **** out of my sr for the last 6 months . No problems yet the clutch is new. Us spending 1500 dollars for an orc is not the same as over there . anyway osaka sucks balls they dont care what they pull they just send it anyway but they are cheap and i was planning my build for a dyno slut 750 wheel i`m almost there student loans refund and tax time are a month away cant wait GT42 come to pappy

[Beanstalk]

W

I know how you feel..I thought i had a bad throwout bearing too on my redtop...I purchased a sr from Jhot and it came with a ORC single plate ...uberawsomeness..!

what throw-out bearing can i use ? I`m not sure if i need a special one . It is tiny and i ordered one a while back from koyo . And its huge does anyone know where i can get a HD throw-out ? A guy on the Rx-7 forums said the ORC`s are nicknamed the rattlers cause they kill throw-out bearings ? i just dont want to mess this pressure plate up?

[treken2t87]

So i am doing my swap and i bought a s13 blacktop from osaka with my buddy who bought the same engine the same time we flipped a coin to see who got what i got the one with no turbo lines but had a t28 and his had cams well i went to change what i thought was a rattling throwout bering but who knew it was an ogura racing clutch and i had never heard ot them so i looked it up and i have the twin disc twin fingered pressure plate with the flywheel its nuts i paid 1750 shipped and got a badass clutch just had to tell someone

Nice!!! Same kind of thing happened to me. I bought a stage 2 exedy clutch kit ready to install when I did swap, but I found out I had the same clutch and flywheel as you!!! Damn is that thing loud or what Can't imagine how much chatter I'm gonna have to put up with after I install a 2 wayLucky dawg

[dtowndrifter]

W

what throw-out bearing can i use ? I`m not sure if i need a special one . It is tiny and i ordered one a while back from koyo . And its huge does anyone know where i can get a HD throw-out ? A guy on the Rx-7 forums said the ORC`s are nicknamed the rattlers cause they kill throw-out bearings ? i just dont want to mess this pressure plate up?

those rx7 guys got **** coming down on them left and right..You can get everything from here, that has to do with that clutch..

http://www.rhdjapan.com/index.php

[BrianHarte]

That's pretty rad that you got a nice ORC twin plate.

That is a pretty heavy duty clutch! Be careful. Big twin plates like that have been known to break transmissions fairly often.Was the motor pretty much stock besides the clutch?

[rbs14kouki]

same thing for me last year i bought a rb26dett/rb25 transmission bolted to it ... when i took the transmission off at my house to check on the clutch , here is wath i found !!!

condition : like new !!!

[number80]

I don't know about you guys but I'd rather buy an engine that is stock as when it left the factory. Buying a motor that really only has 30K on it and has not been pushed to the limits has a better chance not being abused.

Having a motor that came with such a heavy duty clutch leads me to think that motor was probably pushed hard. Even if everything else is stock there like the manifold and turbo ect ect that doesn't mean they couldn't have just slap on some stock components and sell you a stock looking motor. Trying to make you think you really got a 30k mile motor like they all BS on.

Anyways it's still a good find if the motor runs like a champ. I driven those clutch before and the Exedy twin disk and those are a lot more harsh than the Exedy.

[Ghast]

I think it depends on what you are buying the engine for.

But i get what you are saying Number80

I honestly don't even FULLY know how a clutch works yet.

Good stuff though.

[Koshin]

nice find...Ive heard bad things about Osaka....

[Rudelude22]

When i used to build hondas, i bought a jdm h22 off them, and the damn thing never ran right, was missing an ECU that was supposed to come with it...

[tEknoS13]

I got a $350.00 clutch

[Beanstalk]

Our engines that we got from osaka were some of the best engines i`ve ever seen imported . my friend thinks he has somthin done internal wise cuz he put down 270whp @ 9 psi and it runs like nuts with the T-25 . Mine came with a T-28 and pulled the v/c and it was clean no build up or sludge to speak of . However my friend who has bought several engines now (20-30) from them got boned on the only one he bought for himself .....Bent valves And they said cuz 30 days were up no warranty

[Beanstalk]

Our engines that we got from osaka were some of the best engines i`ve ever seen imported . my friend thinks he has somthin done internal wise cuz he put down 270whp @ 9 psi and it runs like nuts with the T-25 . Mine came with a T-28 and pulled the v/c and it was clean no build up or sludge to speak of . However my friend who has bought several engines now (20-30) from them got boned on the only one he bought for himself .....Bent valves And they said cuz 30 days were up no warranty

[Beanstalk]

those rx7 guys got **** coming down on them left and right..You can get everything from here, that has to do with that clutch..

http://www.rhdjapan.com/index.php

Hey thanks for that site i found the throwout bearing ... 200 bucks that sucks but you get what you paid for