Snake Racing Strut Spacers

[InfinQX4]

Wanted to post a pic of these. Just had them brought back direct from DownUnder.

These are the 35mm (1.38") spacers. They advertise as lifting 50MM (1.96") on their site. Not sure how Aussie math works, but seeing as how they are 35mm thick, I find it hard to believe 50mm will come of it. Perhaps someone has a better understanding of this and can explain.

http://72.34.32.141/~snakerac/...01781

Package came with long bolts; the mounting holes in the spacer are threaded.

[fueler]

holy s*** those are beautiful !!!! How much did you pay?! the way they work is pretty simple. they just go between the strut and the strut tower (body). so if they are 35mm thick, thats exactly how much lift you will get. And its great they gave you bolts. I'm going to research these.

Still 35mm is a good size! The ones i had before were only 1" (and i sold them instead of installing them)

[fueler]

$245 aud = ~165 USD... ouch a little more than i want to spend.... but i do want to do SOMETHING with my r50....

[InfinQX4]

They are very nice and well done.

About $145 USD. Not sure what shipping would be becuase I had a buddy bring them in for me. I actually purchased them from http://www.4wd1.com, a reseller. It wasn't until I saw them that I discovered they were from Snake Racing. Direct from Snake Racing, they offer 15mm - 50mm sizes. Would have gone straight for the 50mm had I known earlier. The guys I bought from only had the 35mm.

I plan on putting these on top of the OME srpings.

Also scored when my mechanic said he's about 90% sure he can rig up a front diff drop to level out the axels once the lift in on. I'll let you know how that goes in a few weeks.

[pathfinder_se_black]

do they make anything for the rear? or would this kit even the truck out?

[fueler]

Sorry for resurrecting this thread, but im about to order me a set also for my OME springs,

wanted to ask you, how difficult was the install?