Smic install Help

Post by **Morph** » Wed Mar 03, 2004 1:18 pm

Ok guys i SEARCHED MY *** OFF. I searched google Nico other 240 froums NOTHING. I need help on the smic. I know that it goes on the left side of the car infront of the left wheel. Like a web page showing how to run the piping and stuff would be great. Please no flames i'm new to the world of diy.

P.S. i have the simc and all piping needed.

Thanks alot guys you've saved my *** alot lately.

~Morph~

Post by **Morph** » Wed Mar 03, 2004 1:18 pm

Common guys i need some real help here.

Post by **1mns13** » Wed Mar 03, 2004 1:18 pm

If you search the internet you will find lots of stock SMIC pics.

Post by **Supafly** » Wed Mar 03, 2004 1:18 pm

just look at it, it'll kinda explain itself once you play with it. just shove it up in there and see where the brackets line up with bolt holes and where the piping goes through the tray under where the stock airbox went. and just an FYI cut out the raise part of that tray (the kinda teardrop shaped spot that already has a hole in it)

Post by **1mns13** » Wed Mar 03, 2004 1:18 pm

The proper cutout is in all 91- S13s.

Post by **Morph** » Wed Mar 03, 2004 1:18 pm

Ok guys thanks for the help thus far but where can i get more piping for the smic from?????

Post by **S13240** » Wed Mar 03, 2004 1:18 pm

Morph wrote:Ok guys thanks for the help thus far but where can i get more piping for the smic from?????

I thought you said you have all pipings? How far have you gotten into installing that smic and pipings?

Post by **Morph** » Wed Mar 03, 2004 1:18 pm

the piping i have the the throttle body is the wrong size.

Post by **Morph** » Wed Mar 03, 2004 1:18 pm

OK guys im almost done the only thing that i have left is to make a custom cold pipe b/c the one that came with it is for the ca and i dont thing that i can run it b/c its so small. I've searched alot on this and just need some dimetions on the piping. I think that it Should be 2 1/2 piping just not sure how long.

Thanks

~Morph~

Post by **S13240** » Wed Mar 03, 2004 1:18 pm

Wrong size piping? Perhaps you're just missing the throttle body coupling that connects the cold pipe to the throttle body. I'd have to see a picture of your cold pipe to know!

Post by **Morph** » Wed Mar 03, 2004 1:18 pm

Email address???

Post by **S13240** » Wed Mar 03, 2004 1:18 pm

[email protected]

Post by **Morph** » Wed Mar 03, 2004 1:18 pm

Sent.

Post by **S13240** » Wed Mar 03, 2004 1:18 pm

Yep it definitely looks like you have a ca18det smic setup. The cold pipe is not the one also.

Post by **Morph** » Wed Mar 03, 2004 1:18 pm

is there any way to make the ca pipe work or hack and saw my old ka intake and to make it fit???

Post by **S13240** » Wed Mar 03, 2004 1:18 pm

The easiest from what I can see in the picture is to by an actual sr smic cold pipe or custom make yourself one.

Smic install Help

Smic install Help

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums