Slow revving and dying. Nistech, please help.

Got questions about your Nissan? We're here to help, and it's FREE!
Altiman94
Posts: 5891
Joined: Sun Jun 22, 2003 12:13 pm
Car: 1989 Nissan 240SX

Post

well I was plugging up some vaccuum lines on my car and then went to start it. Wouldnt start, so I installed a new fuel pump, still nothing. I took out number 1 plug and found htere to be no spark. I found that my coil was half unplugged so I plugged it back in. It starts now, but almost immediately dies. If I give it gas it is almost unresponsive and dies immediately. I can start it up again and it will do the same exact thing. MAF is good, fuel pump shoul dbe good as I just replaced it. I'm thinking the coil may be my problem. Please help.


NISTECH
Posts: 10585
Joined: Sun May 25, 2003 4:17 am

Post

it will start right back up every time after it dies? did you leave a vaccum line off?

Altiman94
Posts: 5891
Joined: Sun Jun 22, 2003 12:13 pm
Car: 1989 Nissan 240SX

Post

I actually plugged up the iaa valve line. I forgot how it all goes back together, so how do I go about connecting that line from the intake to the iaa again?

NISTECH
Posts: 10585
Joined: Sun May 25, 2003 4:17 am

Post

it hooks to your intake tube. its like the only one inch hose coming out from under the intake. It should be obvious??

Altiman94
Posts: 5891
Joined: Sun Jun 22, 2003 12:13 pm
Car: 1989 Nissan 240SX

Post

no, i plugged up the line comign from the valve itself. I got it straightened out now, car runs good.

Altiman94
Posts: 5891
Joined: Sun Jun 22, 2003 12:13 pm
Car: 1989 Nissan 240SX

Post

also had another vacuum leak i fixed

NISTECH
Posts: 10585
Joined: Sun May 25, 2003 4:17 am

Post

sweet! so its all good now?

Altiman94
Posts: 5891
Joined: Sun Jun 22, 2003 12:13 pm
Car: 1989 Nissan 240SX

Post

seems to be


Return to “Nissan Online Mechanic”