sleepy eyes

ONLY for ADVANCED technical discussion about the 240sx!
240sxluv
Posts: 117
Joined: Thu Apr 28, 2005 8:58 am
Car: 1989 Nissan 240sx fastback

Post

does antbody know the easiest way to make sleepy eyes?


Zydeco
Posts: 5129
Joined: Tue Sep 17, 2002 4:34 pm
Car: The poster formerly know as -]sTm[-HeavyHips
Location: left coast. USA.
Contact:

Post


st33f
Posts: 377
Joined: Mon May 02, 2005 4:31 am
Car: 1990 240sx - redtop sr20det, T04B/T28 hybrid, UG coilovers, 3inch turbo back

Post

unplug ur motors and turn the brown knobs under th eblack caps on top of the headlight motors

Kouks
Posts: 763
Joined: Mon Apr 18, 2005 12:32 pm
Car: 1996 Nissan 240sx S14 Sr20det
Location: Jacksonville FL

Post

take out your headlight button, the one that makes them pop up and down.

Cut the brown wire behind it. Then You turn the lights on, push the headlight button, and turn off the lights. Then double tap the headlight button really fast and your lights will begin to go down. Keep doing it until they are where you want it.

KOUKS

Florida240sx
Posts: 11114
Joined: Thu Jul 01, 2004 7:17 am
Car: 1993 Nissan 240SX Hatch 5spd
2012 Nissan Altima S coupe 2.5
Location: DeLand FL

Post

I had an extra toggle switch.Being my friends are idiots and always try to hook up their system 1st before coming to me I got like 20 blown fuses sitting in my garage.I took out the headlight fuse in the kick panel.Put in a blown one with wire coming out from both sides and ran it to my toggle switch.Now I just kill my lights flip the switch and they stop flip it again and they work.Not complicated at all, just had an extra toggle switch and wanted to use it.

cyanide
Posts: 9
Joined: Wed May 11, 2005 5:08 pm

Post

so let me get this straight, im slow, you pop that button out and u cut that wire and put some electrical tape over it. will ur lights still work after u cut that wire im still a lil confused lol

User avatar
jab11185
Posts: 353
Joined: Fri Nov 21, 2003 5:26 am
Car: 1992 Nissan 240sx
Contact:

Post

yea....otherwise people wouldn't do it

cyanide
Posts: 9
Joined: Wed May 11, 2005 5:08 pm

Post

yeah im fresh but thanks for the reply

cyanide
Posts: 9
Joined: Wed May 11, 2005 5:08 pm

Post

just did it works great, thanks


Return to “240SX Technical Forum”