Since everyone else is doing their CA18DET video thing

[boost_boy]

Here's some video of "overboosted180's" project car. This happens to be one of the smoothest running CA powered car I've seen in a while given the fact that it has:

Upgraded CamshaftsValve springsPorted HeadCometic headgasketARP head studsCP pistons and ringsNew rod and main bearingsNew oil pumpNew front, main, and camshaft sealsClutch house 4 puck sprung clutch with ACT extreme pressure plateT3/T04E 60-1 A/Rs .60/.63Custom turbo manifold50mm wastegateturbo XS BOV

Electronics:

SDS engine management system1000cc injectorsMSD DIS-2 ignition w/2-step option installedMSD coil blocksGreddy profec Type-S boost controllerx2 12 inch fans controlled via SDS systemAutometer oil pressure gaugeAutometer boost gaugeGreddy turbo timerWalbro fuel pump

And anything else that's missing, he can always add to it. When I'm done breaking-in the engine, we'll take it to a dyno and see how it goes. His goal is 450whp, but I have plans of exceeding it and judging from the way this car is acting now, those goals will be met with minimum effort. Enjoy the video (I guess)! I'll add more as the days progress.

Dee

http://videos.streetfire.net/v...2.htm

http://media.putfile.com/S13-with-CA18D ... h-...drive

[GoofyATX240]

Damn that was nice as hell.

P.s. I need to come out to florida some time ahha.

[boost_boy]

Damn that was nice as hell.

P.s. I need to come out to florida some time ahha.

What's up K? It would be nice if we had some kind of huge Florida meet or somewhere in between, so that most of us can get a chance to meet each other in person and talk car crap for a minute or two. How's the car running?

Dee

[GoofyATX240]

It's running pretty good. I'm going to do some more dyno/street tuning today. The funny thing is I never needed to buy cams. The motor came with some other cams I just never really paid real close attention to it haha.

We do need to have a meet though would be nice to actually hangout andbull**** haha. How's everything with your car?

[boost_boy]

It's running pretty good. I'm going to do some more dyno/street tuning today. The funny thing is I never needed to buy cams. The motor came with some other cams I just never really paid real close attention to it haha.

We do need to have a meet though would be nice to actually hangout andbull**** haha. How's everything with your car?

I pulled the head off the sentra for some porting and polishing, new valve springs, guides, seals, a new suspension, drilled and slotted brake rotors, steel braided brake lines, and a few other tricks I got up my sleeve. My goal is to try and get it into the 10sec. fully loaded car group. The head is back on it now, but I'm going to experiment with some different motor mounts because I keep ripping-up the stock ones. As soon as the 240 you see leaves my house, I can concentrate on finishing the white sentra, so that I can start on the red which will have that fully built engine that I did a couple of years back. Ought to be interesting.

Dee

[GoofyATX240]

Damn that should be nice. Cars always seem to be an ongoing project that never actually ends heh. I'll try to give you a call later on. I don't know if you have ever seen a full pic of my car, but here is one.

[boost_boy]

Yeah, this is the 1st time I've actually seen a pic of it. Hit me up if you can. I gotta go check on the status of an engine that was supposed to be shipped to one of our members. Laterz................

Dee

[capwred]

very nice dee. i need to make the long trip one day to meet up with you and hang out.i really need to bring my car and alot of money to you and get mine up around 450rwhp.i should have 300 with the set up im going with now.but im sure im going to want more.

[sxcoupe]

daham you were red lineing the shizznet out of that thing, that was awsome. great post

[boost_boy]

very nice dee. i need to make the long trip one day to meet up with you and hang out.i really need to bring my car and alot of money to you and get mine up around 450rwhp.i should have 300 with the set up im going with now.but im sure im going to want more.

You don't need a gang of money, but you have to be dedicated and plan ahead. I wish I can meet all of you guys, even the hard-heads .

Dee

[boost_boy]

daham you were red lineing the shizznet out of that thing, that was awsome. great post

Yeah, and it's still has less than 300 miles on it.

Dee

[Nowhere]

May I put these on streetfire?

[ragenasian]

Nice vid.

[Swedish Mike]

Really cool! Always nice to see fast street cars.

Dee, what gearbox are you using in the Sentra? Any vids on that car?

/Mike

[sxcoupe]

Yeah, and it's still has less than 300 miles on it.

Dee

i wish there were more vid"s like yours i cant stop watching it. makes me wont a turbo "bad"

[boost_boy]

May I put these on streetfire?

The 1st ones there, but the 2nd one isn't. Do what you want with it.

Dee

[float_6969]

Looks great Dee. It's not often that you can see on a video how fast a car is. This definatly shows how fast that car is.

Congrats!

[boost_boy]

Looks great Dee. It's not often that you can see on a video how fast a car is. This definatly shows how fast that car is.

Congrats!

Thanks Ryan! I definitely appreciate you guys' compliments on this because I really worked hard and I do mean hard to get this car up to big performance status. I mean this is @ 13psi of boost, softly-tuned for break-in, and without the DIS-2 which I'll probably hook-up today or tomorrow. I'm very curious to see how it hold's up @ 17,18,22,25,27 & 30psi. Those are the areas I will be tuning in and around, so stay tuned.

Dee

[capwred]

i say we get a meet up some where in the have way.i would love to meet all the ca guys.before the summers over.

[boost_boy]

i say we get a meet up some where in the have way.i would love to meet all the ca guys.before the summers over.

That would be nice! Or at least before more people spin bearings .

Dee

[Bwana]

You guys make me feel like I'm on the other side of the world...

Great work on that car Dee!

[boost_boy]

You guys make me feel like I'm on the other side of the world...

Great work on that car Dee!

Thanks alot, Q. I'm very confident that your little project will be something nasty as well.

Dee

[jt15833]

was he meaning to hit that cut in the second video? it was hard to watch

[boost_boy]

was he meaning to hit that cut in the second video? it was hard to watch

What cut were you referring to? If you're referring to the engine, the only cuts it possibly may have experienced is is ignition cut and what is allowed by my foot. Anyways, it still a freshly built motor, so I didn't want to totally rape it as it can rev higher.

Dee

[capwred]

what do you think it can rev to?in the video you went past 8k.

[boost_boy]

what do you think it can rev to?in the video you went past 8k.

Hmmm, I'm pretty confident it will hit 9000rpm, but probably won't stay there and be effective. I do believe this thing should see some effective power up to around 8200rpm with whatever rpm delivering extra mph.

Dee

[XTCshri2222]

can't wait to have my CA all rebuilt, would be sweet to have a nice FL meet with all the CA people

[boost_boy]

can't wait to have my CA all rebuilt, would be sweet to have a nice FL meet with all the CA people

The CA is starting to become a popular Florida 240 engine, huh! Or is it that we are just cheap as hell and went with the cheapest thing available .

Dee

[c-rad]

can't wait to have my CA all rebuilt, would be sweet to have a nice FL meet with all the CA people

Daytona Beach!!!!!!!!!

[Boostin_S13]

Looks really good, You better post videos of when you start uping the boost!