silvia light conversion harness

[spenymoor]

hey all
i was wondering if anyone could help me with a harness. either somewhere to buy, a diy or something to modify my pop-up harness.
i bought my front end conversion it came with fenders, bumper, hood, sidelights and double projector headlights.
the guy wasnt letting his harness go.

so if anyone out there can possibly share some great and all powerful nissan wisdom, i would greatly accept it!

thanks all

[Fenris]

Its a pain, but i ended up making my own sub harness and my front end didnt have any wiring either.

Unless, your lights do have the harness, then just plug the bit that would normally attach to the pop up bulb to the spot on the light. Wire in one set of corners to the bumper lights, and the other lights in the corners plug in where the side markers did.

http://easternbeaver.com/Main/H4_socket_wiring2.jpg

That image shows what blade is what, then just build a harness to match. make the grounds for both the high and low tie together. The fogs get wired seperatly, usually into the pop up motor harness, there is a how to in the tech articles.