SI/SII/Neo RB25 Wiring

[r0nix]

Anyone know the differences? I hear of so many people who have done the swaps but not that many have been documented in detail. More so that of the Neo series engine seems almost impossible to find (even though I can only think of one person who's done that particular swap)

Would doing the wiring to a standalone (PFC, Microtech, etc.)rather then the stock ECU make things more difficult?

I'm just looking for general information here that I'm having a hard time finding, thanks in advance for any replies.

[TurbNurb]

One of the differences that i found when putting my series II rb25 in, was that you dont need to do the step with the grey wire. so far that the only difference that i know of.

[Joe]

the series 2 does not need power for the injectors or the AIV so it cuts down on engine bay wiring significantly. that is the only wiring diffrence that matters for wiring into a 240. as far as i know the NEO is the same as the S2 wiring but dont quote me on that.

[r0nix]

are there any shops that are capable of doing the Neo Wiring (rewire the harness)? I've heared +/- about mckinney doing it? Have had no confirmation or have I contacted them my self, but does anyone know for sure?

[PANGES]

are there any shops that are capable of doing the Neo Wiring (rewire the harness)? I've heared +/- about mckinney doing it? Have had no confirmation or have I contacted them my self, but does anyone know for sure?

Mckinney motorsports SHOULD be recieving my NEO RB25 wires anyday now... I'll let you guys know how it goes if/when I get them back.... they told me 20 business days to do them...

[r0nix]

Mckinney motorsports SHOULD be recieving my NEO RB25 wires anyday now... I'll let you guys know how it goes if/when I get them back.... they told me 20 business days to do them...

So you sent them a KA + RB Harness? How much did they tell you it would run? Because I've seen others price for the RB20 harness for $300 just to rewire?

[PANGES]

450 for the KA and rb harnesses