should i buy this sr20det front clip???

Post by **implict** » Sat Nov 23, 2002 10:57 am

I e-mailed this guy from ebay and asked how much the front clip would cost... he siad 2,200 shipped..... ill show u the e-mails...

I can do it for $2200 shipped.

Thanks for you interest, I look forward to doing business with you.

Marcus MizziAdV Technologies

Cool thanks. I appreciate your business. The 15th sounds good. I do not haveany pictures because my contact has several clips and its on a first comeserve basis but they get new ones in all the time. Please make the moneyorder payable to Marcus Mizzi and send to:

AdV Technologies5863 Leslie Street, Unit 212Toronto, ON M2H 1J8 Canada

It does not have to be a international money order since it will be goinginto my bank account in the United States anyways so I can wire my partnerthe money.

Feel free to call me or email me at anytime if you have any furtherquestions or concerns.

Thanks again, I appreciate your business.

Yours truly,

Marcus MizziAdV Technologies

http://cgi.ebay.com/ebaymotors...11546

Well??? think i should???? its also in canada.... ive heard some stuff about ordering from there....

:help :help :help

Post by **implict** » Sat Nov 23, 2002 10:57 am

He has a good feedback... and will go through ebay ..... for security... think i should?????

Post by **Daunttless** » Sat Nov 23, 2002 10:57 am

he's on the boards here, there have been several discussions involving him, I'm sure he'll pop up again.

Post by **Thesil** » Sat Nov 23, 2002 10:57 am

isnt that the same motor that was discussed in the flash options thread?

flash options motorhttp://www.flashoptions.com/i_prod/PA010010.JPG

your motorhttp://www.advautoparts.com/images/sr20det009.jpgstriking similarities....

Post by **flashoptions** » Sat Nov 23, 2002 10:57 am

Hi, the way business are to succeed is without bad mouting. I guess mr.dauntless got to learn this thing. We at flashoptions.com started operating on the 28th of september we're a very new company that started. We already receive tons of email and we were denied to close a few deals because of a few bad mouting started here on these few forums nissaninfinity and 240sx. I'm to contact with the owner of 240sx and get you a few real pictures of a few real front clips crated with 240sx.ORG this is to show we're geniune company and not a knock off. FlashOptions deals with KMZ

(USA biggest JDM honda engine dealer) Jdmhonda-parts , j-spec-auto , libero usa , ricky-auto-center , adv autoparts , hi-perf imports , ABCD of los angeles.

Last week our company receive a phone call from the United States embassy of malaysia to check weather we are a geniune company in Malaysia. We gave in all the details and we're proven geniune. You can personally contact the US embassy to see if flashoptions.com is a geniune company.:ylsuper

Mr.Marcus Mizzi is official Flash Options Dealer in Canada.

after learning more about E-Commerce , we gonna upgrade our site once more.

if anyone thinks this is a fake forum posting by anyone contact me at [email protected] (we'll reply you promptly)

Thank YouFlashOptions Sales DepartmentTEL# : 011-60-12-3896600Country Code = 011State Code = 6Phone = 0123896600------------------------------------Japan , Malaysiahttp://www.flashoptions.com[email][email protected][/email]JDM Engines Parts Wholesaler & Exporter

Post by **MaineExport** » Sat Nov 23, 2002 10:57 am

flashoptions wrote:Hi, the way business are to succeed is without bad mouting.........

were denied to close a few deals because of a few bad mouting started here on these few forums

I'm not sure what bad mouting is, but it sure sounds bad! ESL?

Post by **Daunttless** » Sat Nov 23, 2002 10:57 am

Actually, if you'd noticed, which I guess you didn't, I never badmouthed your company. I tend to avoid directly bad mouthing companies unless I know someone who has been ripped off by them. I made a generalization, which for the most part is true, you being in Japan and Malaysia should know that a vast majority of startup importers in those countries are scam artists, you can't really deny that. Truly, one way or another it doesn't matter to me if you succeed in establishing your directly to the US market, as bad as that sounds I said it in the other thread as well. We cater to different crowds so most of the people who would buy from you wouldn't buy from me in the first place. I don't really care one way or another what you do so long as you don't rip people off. Also, I don't care if you post your prices here or what not so long as you are part of the community, if someone asks about you thats fine, but unless you stay and help any advertisements you place will probably be deleted, just for your reference theres a post about it at the top of the screen called Businesses that post 1 time. Lastly, feel free to review any posting about you, you'll note that I have not slandered/libeled your company. Enjoy your day.

Post by **mark** » Sat Nov 23, 2002 10:57 am

Any direct links to posts about me? I have been away from the forum for a while.

Post by **Daunttless** » Sat Nov 23, 2002 10:57 am

Nah, all the good direct links about you were on the old forum.

Post by **mark** » Sat Nov 23, 2002 10:57 am

Oh ok.. So no one is mad at me or anything.. good.

Post by **mark** » Sat Nov 23, 2002 10:57 am

Hey Daunt, quick quesiton. Will a FWD NX performance clutch for sr20de fit a S13 SR20DET transmission?

Post by **flashoptions** » Sat Nov 23, 2002 10:57 am

Dauntless, english is my country's 2nd language and it's hard for me to understand what your saying in total. Overall i guess it will take about a month or so, we receive about 8 orders this week.We saved up all their contacts and once they receive their engines they are going to be in our testimonial. we'll upgrade our site with a testimonial so customer can view them.This way I can rest assure you we're not a rip off. I understand because this is international. If we accept Credit Card payment I guess we can go very very far indeed. Anyway good luck in your business I wish you all the best.

Post by **Daunttless** » Sat Nov 23, 2002 10:57 am

Indeed, I don't have any ill will towards you. : ) I wish I spoke Bahasa Melayu so that I could better convey my points, alas I cannot, I hope you can understand that anything that you may have taken as an attack against you is merely a protection for our members. I don't know you, therefore I don't trust you, its that simple. However, good luck with expanding into America. Enjoy your day!

Post by **mark** » Sat Nov 23, 2002 10:57 am

Hey daunt. You find out about the clutch?

Post by **Daunttless** » Sat Nov 23, 2002 10:57 am

I didn't even check, but I would venture since SR20DE clutches from Sentras don't fit, that it won't.

Post by **ItzGenX** » Sat Nov 23, 2002 10:57 am

They don't fit because the FWD SR20's have different bellhousings then their RWD brothers. The bellhousing on the RWD transmissions are deeper, allowing for slightly thicker and larger pressure plates.

Post by **mark** » Sat Nov 23, 2002 10:57 am

Oh ok.. Thanks man. I appreciate your help

Post by **mark** » Sat Nov 23, 2002 10:57 am

Thanks InzGenX. I appreciate your help as well

Post by **flashoptions** » Sat Nov 23, 2002 10:57 am

I got pictures and referal as proof.. check http://www.flashoptions.com (S13 Christmas special avalible on promotion item) USD2000 only with 10% discount.

You can see all the pictures that is added our customer, our products we're a geniune company. We just want to protect ourself.

----- NICO FORUM MEMBERS --------- a saying by " A PICTURE SPEAKS A MILLION WORDS "see the picture on S13 http://www.flashoptions.com---------------------------------------------

We're updating pictures now with paper that is written http://www.flashoptions.com so this will proof geniune and no one can ever copy the pictures again.

That's all for now thank you

Post by **Dori Dori** » Sat Nov 23, 2002 10:57 am

Is http://www.flashoptions.com painfully slow or is it just me.

I'm on a T1 and it's been taking me forever to load your pagesl:(

Post by **flashoptions** » Sat Nov 23, 2002 10:57 am

to me it's very fast , almost anyone has it fast,wondering why yours is slow plus u're using a TI.. very curious

Post by **Jean** » Sat Nov 23, 2002 10:57 am

flashoptions wrote:I got pictures and referal as proof.. check http://www.flashoptions.com (S13 Christmas special avalible on promotion item) USD2000 only with 10% discount.

You can see all the pictures that is added our customer, our products we're a geniune company. We just want to protect ourself.

----- NICO FORUM MEMBERS --------- a saying by " A PICTURE SPEAKS A MILLION WORDS "see the picture on S13 http://www.flashoptions.com---------------------------------------------

We're updating pictures now with paper that is written http://www.flashoptions.com so this will proof geniune and no one can ever copy the pictures again.

That's all for now thank you

Can you get s15 silvia head lights for around $500???

Thanks

Post by **Jean** » Sat Nov 23, 2002 10:57 am

Hey,

ALso that s14 engine you have for sale, is that %10 discount included in the price already? Is it a direct swap into a 97 240sx? What would be the going rate of labor to swap the engine out too? oh yeah, does it come with an a/c compressor??? It gets hot down here in Atlanta, Ga. Thanks. I'm just deciding if I should do a S15 conversion or a S14 engine swap. THats it.

Post by **midnight brother** » Sat Nov 23, 2002 10:57 am

even if you get headlights for that cheap you will need the brackets, hood, and fenders, bumper. you would end up fabricating everything, alot of the people here can't do this correctly and ill include you. buy a kit from dauntless its the lowest price you'll find compared to importfan and project d auto imaging. you'll get 100% fit with everything included, no fabricating, and a good price.

Post by **implict** » Sat Nov 23, 2002 10:57 am

Well somone has to try flashoptions.. lol... im haveing some thoughts... i might be the first..... wish me luck... and hope it goes threw well.... stop me if im wrong

should i buy this sr20det front clip???

should i buy this sr20det front clip???

AdV AutoParts = Official FlashOptions Dealer

Re: AdV AutoParts = Official FlashOptions Dealer

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums