set of HKS 264 cams located, anybody wants?

[themadscientist]

I was at a used parts joint and they have a set of HKS cams, both 264/8.5, anybody want me to snap them up on their behalf?

[DALAZ_68]

price?

[Buddyworm]

These things are awesome, get them if you can people. Still streetable and the engine pulls hella smooth all the way to redline. Say goodbye to what little bottom end our engines did have though, it won't do much below 3000rpm. Unless something is wrong with my car, but I don't think so, the way the engine pulls when you put your foot down really suggests things are going well...

**Edit: Whoops, apparently I've become lysdexic. My cams are 256's. But that just means the 264's will up the crazy.

[ca18detgabby]

price?

[mbmbmb23]

Say goodbye to what little bottom end our engines did have though, it won't do much below 3000rpm. Unless something is wrong with my car, but I don't think so, the way the engine pulls when you put your foot down really suggests things are going well...

**Edit: Whoops, apparently I've become lysdexic. My cams are 256's. But that just means the 264's will up the crazy.

Are your butterflies hooked up correctly?

[themadscientist]

$350 shipped. That covers the procurement packing and shipping and a little lapdance fund for yours truly.

[DALAZ_68]

ill take em...makes me wonder though....what piston/.rods would go good with these...

hmmm

ohh but there used huuh

[themadscientist]

Irrelavent. Longer duration simply moves your power peak up the RPM range. 264s aren't going to put that peak in a range a stock motor can't handle. 272s and above sure but IMO at that point you need to be thinking about more than the short block, namely collapsing lifters and whether the head's ports will flow enough air.

[jey_253]

Also like to know if those puppies are new are not???

[themadscientist]

spoken for

[float_6969]

If it falls through, I've got dibs!

[themadscientist]

No, you got dibs on this engine some guy wanted and then forgot about

[float_6969]

I didn't forget about it, I'm just trying to save some dough on shipping.