Separating steering knuckle from transverse link 2013 G37

[marco01]

Hello everyone. I am replacing the left (driver) side CV on my 2013 Infinity G37 sX.

I have hit a wall trying to separate the steering knuckle from the transverse link without damaging any parts. The nut holding them together came out. However, the steering knuckle won't move enough to clear the bolt attached to the transverse link. So, both of them can't be separated. I need to detach them so that the half shaft can come out of the

See picture below

http://imgur.com/jnmGqOu

Here is what I did to get to this point.

1. Removed wheel
2. Jacked the car
3. Removed the brake caliper
4. Removed the speed sensor
5. Removed the tie rod end
6. Disconnected the transverse link from the shock absorver

Any help finding ways around this problem will be appreciated