Hey everyone, I was changing the drive belts on my '05 FX 35 today and I noticed an issue that I need to fix. The bracket that the AC belt I/P connects to and where the bolt pushes from the bottom to tension the belt has one of the little tabs on the bottom of it bent pretty bad. The "collar" on the bolt by the head looks like it's barely holding in. The bracket itself looks like it's only attached by a few bolts to the crank case, and looks to be very simple to replace, but for the life of me I can't find the part listed anywhere in any parts diagrams that I've looked at.
Can someone point me in the right direction please? I'd like to replace this ASAP!
Seeking P/N for 05 FX35
-
cmesurf
- Posts: 533
- Joined: Sat Oct 10, 2009 4:07 pm
- Car: Infinitis, 03 FX35, 07 g35 sedan, 05 FX45, 09 G-vert & 14 Q50S Hybrid AWD
Re: Seeking P/N for 05 FX35
which one do you need? see pic below- I have these:
Re: Seeking P/N for 05 FX35
Thanks for the reply. Actually it's not the adjustment screw that I need, but the bracket that those two slide up and down and that the screw "pushes" against at the bottom to change the tension. In other words, I need the bracket that those attach to. Sorry if my description isn't too good. I may try to get a pic of it, but it's on my fiancee's car and I'm leaving town on Monday and don't know if I'll have a chance to get underneath and get the panel off to get a pic.
-
cmesurf
- Posts: 533
- Joined: Sat Oct 10, 2009 4:07 pm
- Car: Infinitis, 03 FX35, 07 g35 sedan, 05 FX45, 09 G-vert & 14 Q50S Hybrid AWD
Re: Seeking P/N for 05 FX35
miataeric wrote:Thanks for the reply. Actually it's not the adjustment screw that I need, but the bracket that those two slide up and down and that the screw "pushes" against at the bottom to change the tension. In other words, I need the bracket that those attach to. Sorry if my description isn't too good. I may try to get a pic of it, but it's on my fiancee's car and I'm leaving town on Monday and don't know if I'll have a chance to get underneath and get the panel off to get a pic.
-
cmesurf
- Posts: 533
- Joined: Sat Oct 10, 2009 4:07 pm
- Car: Infinitis, 03 FX35, 07 g35 sedan, 05 FX45, 09 G-vert & 14 Q50S Hybrid AWD
Re: Seeking P/N for 05 FX35
the bracket is appx $20 but vin is needed to get correct pne, pm me when you get a chancemiataeric wrote:Thanks for the reply. Actually it's not the adjustment screw that I need, but the bracket that those two slide up and down and that the screw "pushes" against at the bottom to change the tension. In other words, I need the bracket that those attach to. Sorry if my description isn't too good. I may try to get a pic of it, but it's on my fiancee's car and I'm leaving town on Monday and don't know if I'll have a chance to get underneath and get the panel off to get a pic.
-
cmesurf
- Posts: 533
- Joined: Sat Oct 10, 2009 4:07 pm
- Car: Infinitis, 03 FX35, 07 g35 sedan, 05 FX45, 09 G-vert & 14 Q50S Hybrid AWD
Re: Seeking P/N for 05 FX35
Can't send you PM as you have your PM turned off for receiving private message but here's the info
11935P - BRACKET-IDLER PULLEY
Part Number: 11926AL510
Year range 11/2002 to 11/2005
11935P - BRACKET-IDLER PULLEY
Part Number: 11926AL510
Year range 11/2002 to 11/2005
Re: Seeking P/N for 05 FX35
I'll get my PM turned on. Thanks for the help!cmesurf wrote:Can't send you PM as you have your PM turned off for receiving private message but here's the info
11935P - BRACKET-IDLER PULLEY
Part Number: 11926AL510
Year range 11/2002 to 11/2005
Find Your Forum!