seat rails/brackets help bride mo rails

[3ps14]

I was given some ebay recaro knock off seats, and I was wondering if the bride mo seat rail would fit the bottom of the seat. Currently they're on some wedge engineering brackets, but they sit toooooo high. My legs are an inch away from the stock steering wheel.

My car is a 96' s14

http://www.frsport.com/Bride-Type-MO-Su ... _1225.html

I saw the picture with the dimensions, but they look nothing like the other pictures which show the brackets for the 240sx... So I was wondering if someone did have a pair, if they could be so kind and give me the dimensions and how low it does actually sit before I go ahead and shell out $200 dollars I would very much appreciate it.

[HaloZ]

from what i can tell the MO rails are just the RO rails with a Plate bolted on top with some more holes. and the bolt holes for the Plate are the same holes for mounting the rails to RO type seats.

i have a set of Recaro SRDs and looking for rails. and measure 405 mm Lto R and 235/260mm from the rear bolt to the front 2 bolt mounts.

what are your measurements from your mounts Left to Right and forward to rear?

[Syrus33]

i have recaro srd seat and bride mo rail. the seat will bolt to the plates, then bolt the plates to the rail but the seat will be way to the left.
i just drilled new holes in the plates to move the seat back to the right.