SEARCHED: S14 Wiring Clarification

[jdm_master_X]

i've wired up plenty of S13 SRs, ive done one S14 swap, but i never did the harness on that (without A/C or ABS).

i might be doing another S14 SR20DET swap into the S14 chassis , and a lot of people have been telling me the wiring is identical to that of an S13. ive searched for about an hour now about wiring issues such as A/C, ABS, and the VTC. i know there are minor differences, but as far as wiring at the MAF, battery side, and ECU side of the harness, is that the same?

nobody seems to answer the questions on clear differences when wiring the s14 harness. most people say SEND IT OFF, but i want to know how to wire it because the guy asking for the swap isn't made of cash. id much rather he send the harness off, but i want to know the wiring information as an alternative, in case he doesnt want to spend $300 and wait for 1-2 weeks.

anybody's help would really be appreciated! thank you!

[jdm_master_X]

help?

[jdm_master_X]

please? i would like to know some information about the wiring. thats all that i need.

[mrzabala]

i've wired up plenty of S13 SRs, ive done one S14 swap, but i never did the harness on that (without A/C or ABS).

i might be doing another S14 SR20DET swap into the S14 chassis , and a lot of people have been telling me the wiring is identical to that of an S13. ive searched for about an hour now about wiring issues such as A/C, ABS, and the VTC. i know there are minor differences, but as far as wiring at the MAF, battery side, and ECU side of the harness, is that the same?

nobody seems to answer the questions on clear differences when wiring the s14 harness. most people say SEND IT OFF, but i want to know how to wire it because the guy asking for the swap isn't made of cash. id much rather he send the harness off, but i want to know the wiring information as an alternative, in case he doesnt want to spend $300 and wait for 1-2 weeks.

anybody's help would really be appreciated! thank you!

Just having lunch so Ill try and help you find some more information later tonight. But heres some I found. http://www.200sx.org/s14-ecu.html Here the ecu diagramI read from courtesy nissan that:You will have to extend the MAF wires and the Oxygen sensor wires to fit the USDM 240sx chassis. Because the Ecu in the JDM version is on our driverside so the harness comes shorter then the US 240sx Harness

[chicos240]

Ok, I am in the same boat you were, Id appreciate if you could shed some light on subject. zerothread?id=212968